Skezza Posted April 11 Share Posted April 11 I have a number of guitars and basses and this is a problem I have never come across before. While I am playing one of my basses one of the saddle height adjustment screws is undoing itself presumably because of the vibrations. I did a gig two weeks ago and after 45 minutes of playing one of the screws had vibrated back into the saddle meaning the low E string was unplayable due to the fret rattle. Do I need a new saddle or can it be cured? Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted April 11 Share Posted April 11 (edited) Dab of clear nail varnish on the grub screw thread Edited April 11 by PaulThePlug 2 Quote Link to comment Share on other sites More sharing options...
Skezza Posted April 11 Author Share Posted April 11 Will I be able to adjust the height of the saddle in future? Quote Link to comment Share on other sites More sharing options...
Pea Turgh Posted April 11 Share Posted April 11 Great excuse for a new bass. 3 Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted April 11 Share Posted April 11 Yep... just a dab mind... I'd get some SS Dog Point from Spaldings Fasteners... couple of different lengths to stop a sharp bit hanging out the top. Quote Link to comment Share on other sites More sharing options...
Skybone Posted April 11 Share Posted April 11 Get some Loc-Tite Thread Lock. 5 Quote Link to comment Share on other sites More sharing options...
Marty Forrer Posted April 11 Share Posted April 11 Clear nail polish is the trick. Just a dab around the threads. It will not back out and you can still adjust it when necessary. Quote Link to comment Share on other sites More sharing options...
Skezza Posted April 12 Author Share Posted April 12 thanks for the advice Quote Link to comment Share on other sites More sharing options...
Baloney Balderdash Posted April 12 Share Posted April 12 Call an exorcist! 1 Quote Link to comment Share on other sites More sharing options...
shoulderpet Posted April 12 Share Posted April 12 23 hours ago, Skezza said: I have a number of guitars and basses and this is a problem I have never come across before. While I am playing one of my basses one of the saddle height adjustment screws is undoing itself presumably because of the vibrations. I did a gig two weeks ago and after 45 minutes of playing one of the screws had vibrated back into the saddle meaning the low E string was unplayable due to the fret rattle. Do I need a new saddle or can it be cured? Assuming it is something easily replaceable like a Fender style bridge I would just get a new saddle, cheap and easy fix and hopefully should hold out for a long time. Quote Link to comment Share on other sites More sharing options...
Skezza Posted April 14 Author Share Posted April 14 Thanks I might do that Quote Link to comment Share on other sites More sharing options...
Bolo Posted April 14 Share Posted April 14 A touch of superglue on the thread will do the same as nail varnish. Quote Link to comment Share on other sites More sharing options...
Baloney Balderdash Posted April 15 Share Posted April 15 14 hours ago, Bolo said: A touch of superglue on the thread will do the same as nail varnish. Won't superglue fix that grub screw to the thread so that you won't be able to adjust it again? Quote Link to comment Share on other sites More sharing options...
Bolo Posted April 15 Share Posted April 15 2 hours ago, Baloney Balderdash said: Won't superglue fix that grub screw to the thread so that you won't be able to adjust it again? When dry it's just a thin layer of plastic, a nudge with a fitting allen key will free it up for adjustment, same as nail varnish and Loctite thread lock. Quote Link to comment Share on other sites More sharing options...
Baloney Balderdash Posted April 15 Share Posted April 15 (edited) 18 minutes ago, Bolo said: When dry it's just a thin layer of plastic, a nudge with a fitting allen key will free it up for adjustment, same as nail varnish and Loctite thread lock. Is it though? What makes it super then? Doesn't is somehow chemically/physically bind it self to the surfaces it is applied to with a pretty strong bond? If you actually tried this yourself I of course will take your word for it. Edited April 15 by Baloney Balderdash Quote Link to comment Share on other sites More sharing options...
Obrienp Posted April 15 Share Posted April 15 This was a problem with the Hipshot bridge on the first batch of Nordstrand Acinonyx. The official Nordstrand response on TB was to use Loctite medium (It comes in various strengths of lock). Other thread lock products are available! It could be a problem with how well cut the thread is on either the grub screw, or saddle. Replacements for both are available from various sellers on fleaBay for various types of bridge and outlets like Northwest Guitars. Quote Link to comment Share on other sites More sharing options...
Bolo Posted April 15 Share Posted April 15 (edited) 41 minutes ago, Baloney Balderdash said: Is it though? What makes it super then? Doesn't is somehow chemically/physically bind it self to the surfaces it is applied to with a pretty strong bond? If you actually tried this yourself I of course will take your word for it. "Cyanoacrylate glue has a low shearing strength, which has led to its use as a temporary adhesive in cases where the piece needs to be sheared off later. Common examples include mounting a workpiece to a sacrificial glue block on a lathe, and tightening pins and bolts. It is also used in conjunction with another slower, but more resilient, adhesive as a way of rapidly forming a joint, which then holds the pieces in the appropriate configuration until the second adhesive has set. Cyanoacrylate-based glue has a weak bond with smooth surfaces and as such easily gives to friction" https://en.wikipedia.org/wiki/Cyanoacrylate And yes I have used rapid glue like this to secure nuts and bolts so they don't come loose through vibration or what have you. On cars, bicycles and industrial machinery. The 'super' bit is just marketing, like 'Krazy' glue. It bonds great with organic and porous materials. Have a look at the link provided. Edited April 15 by Bolo Quote Link to comment Share on other sites More sharing options...
Muppet Posted April 15 Share Posted April 15 Having done the superglue thing, I would not do it again. When I did want to adjust the screws I had superglued, I chewed the slot up trying to free it, they were stuck so hard. I ended up disassembling the bridge and heating up the stuck parts on my gas stove, to free them up then replaced the screws. Nail varnish is the way ahead! 1 Quote Link to comment Share on other sites More sharing options...
Norris Posted April 15 Share Posted April 15 On 11/04/2024 at 21:37, Skybone said: Get some Loc-Tite Thread Lock. This. It comes in two types/strengths - the weaker one (242 blue) if you ever want to undo it again in future https://www.loctiteproducts.com/en/know-how/build-things/threadlocker-red-or-blue-which-ones-right-for-you.html Quote Link to comment Share on other sites More sharing options...
Skezza Posted April 16 Author Share Posted April 16 did it with the blue loctite 3 days ago got a rehersal tonight for 2 hours lets see how it holds 1 Quote Link to comment Share on other sites More sharing options...
Crusoe Posted April 16 Share Posted April 16 The Threadlock should do the trick, but I was wondering if plumber's tape (PTFE tape) would work. Quote Link to comment Share on other sites More sharing options...
Skezza Posted April 17 Author Share Posted April 17 wondered that myself Quote Link to comment Share on other sites More sharing options...
Baloney Balderdash Posted April 17 Share Posted April 17 (edited) On 16/04/2024 at 11:37, Crusoe said: The Threadlock should do the trick, but I was wondering if plumber's tape (PTFE tape) would work. I am pretty sure it would, but I don't have any actual experience with using it that way, so can't say for certain. That said just applying a dab of thread lock, nail polish or super glue would be easier. Edited April 17 by Baloney Balderdash 1 Quote Link to comment Share on other sites More sharing options...
Ed_S Posted April 17 Share Posted April 17 On 16/04/2024 at 10:37, Crusoe said: The Threadlock should do the trick, but I was wondering if plumber's tape (PTFE tape) would work. Yup, it would/does - I recently used some as a temporary fix on a couple of loose grub screws in a lower-end Ibanez bridge until I could get some replacements, and it kept everything in place but adjustable. It's kinda fiddly to apply, though, and even worse to remove, plus it's hard to keep it invisible on a black bridge. I couldn't honestly recommend it over proper threadlock or just getting some better-fitting replacement parts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.