HX Stomp/C4 Synth/Morningstar MC3 midi setup

[Berserker]

Hey guys,

 

Very new to midi and trying to figure this out! I'm running from the MC3 in to the midi in on the Stomp, then from the midi thru on the Stomp to a Source Audio SA168 midi adaptor and in to the C4.

 

I have the Stomp set as channel 1 and the C4 as channel 2. 

 

I can get the MC3 to control the Stomp just fine, but it won't do anything to the C4. I've tried CC 102 to turn it on, and 104 to turn presets on, but nothing.

 

Any ideas? Am I doing something obviously stupid?

 

Thanks

[lidl e]

Why use the through? 

 

Cant you connect the morningstar directly to the C4?

 

Grt a USB-b to mini usb-b?

 

Thats how i use my dmc micro ro control my c4 and another

[Berserker]

2 hours ago, lidl e said:

Why use the through? 

 

 

Because I'm controlling the Stomp with the Morningstar too. 

[ratman]

You're sending messages to the Stomp fine, so you are definitely sending those messages on MIDI CH 1 from the MC3. Make sure the messages for the C4 are being sent on MIDI CH 2 from the MC3.

And make sure MIDI THRU is enabled in the Stomp (Global Settings > MIDI)

[Berserker]

Thanks, I've actually just figured it out. I hadn't updated the firmware on the C4 for ages, I updated it and it worked straight away 👍🏻