Minininjarob Posted April 20 Share Posted April 20 Ok so my GK MB112II combo is loud. Weirdly loud for such a small unit. But when I’ve taken it out the house it’s too small to be able to hear it properly as it’s firing along the floor. So I bought an amp stand. Which didn’t work as it was designed for a guitar amp which is shallower. There might be better ones which work better for my amp but I didn’t have time to find one as I needed one for last night. So I bought a £9 bit of wood, 22mm x 144mm by 1800mm and made one. I cut a 90 degree angle in 2 identical length at the same time so each side was identical, then braced it together with various bits of wood until I got bored. I just tried to get the biggest tilt on the amp with the 144mm wood width - no audio science here. The width is determined by the space inbetween the (rather large) amp feet. Glued and screwed together and sanded all over and it was done. So the amp fires at me direct when it’s maybe 2m away approximately, it’s super solid and quite light and easy to pack away with my other gear. I might varnish it, I might not! Anyway, I’ve not seen anyone else with something like this or even seen one for sale (I didn’t really look to be honest I just needed a solution fast!) but it works perfectly and costs so little!! if you need something like this have a go at making it yourself, it’s not hard and doesn’t need any special tools. 31 3 Quote Link to comment Share on other sites More sharing options...
ardi100 Posted April 20 Share Posted April 20 That looks fantastic! How did it sound? Quote Link to comment Share on other sites More sharing options...
AxelF Posted April 20 Share Posted April 20 That's amazing! Great work! Quote Link to comment Share on other sites More sharing options...
Acebassmusic Posted April 20 Share Posted April 20 Gator do a wood amp stand - here. Your's looks much more giggable as its sturdier, looks better and also more compact that the Gator one. Probably lighter as well. Yours was £9 plus time, theirs is £108 plus shipping! No contest, you win 👍 You probably should get geared up for the projected incoming orders 👍🤣 Well done! 3 Quote Link to comment Share on other sites More sharing options...
naxos10 Posted April 20 Share Posted April 20 That looks really good. Fancy going into business as you may have a marketable product? Quote Link to comment Share on other sites More sharing options...
floFC Posted April 20 Share Posted April 20 It looks really good 👍 Quote Link to comment Share on other sites More sharing options...
BigRedX Posted April 20 Share Posted April 20 You need to paint it black though... 2 Quote Link to comment Share on other sites More sharing options...
Minininjarob Posted April 20 Author Share Posted April 20 4 hours ago, ardi100 said: That looks fantastic! How did it sound? I don’t think it affected the sound, more it pointed it the right way, but it did sound great to be honest. Was rock solid too. Quote Link to comment Share on other sites More sharing options...
Minininjarob Posted April 20 Author Share Posted April 20 3 hours ago, AxelF said: That's amazing! Great work! Thanks very much that’s very kind of you to say. Quote Link to comment Share on other sites More sharing options...
Minininjarob Posted April 20 Author Share Posted April 20 2 hours ago, Acebassmusic said: Gator do a wood amp stand - here. Your's looks much more giggable as its sturdier, looks better and also more compact that the Gator one. Probably lighter as well. Yours was £9 plus time, theirs is £108 plus shipping! No contest, you win 👍 You probably should get geared up for the projected incoming orders 👍🤣 Well done! I honestly hadn’t seen that - it wouldn’t work with my amp anyway as the stand is too shallow. Looks a bit naff too IMHO 1 Quote Link to comment Share on other sites More sharing options...
Minininjarob Posted April 20 Author Share Posted April 20 (edited) 1 hour ago, naxos10 said: That looks really good. Fancy going into business as you may have a marketable product? I can maybe make one for others if they want one. The standard of this one wasn’t my best work, I wanted to make it out of oak but my normal wood shop has stopped sells shorter lengths so I just got some basic wood from Wickes. I only had a day to make it while I was WFH in my lunchtime!!! Edited April 20 by Minininjarob 2 Quote Link to comment Share on other sites More sharing options...
Minininjarob Posted April 20 Author Share Posted April 20 (edited) 2 hours ago, Acebassmusic said: Gator do a wood amp stand - here. Your's looks much more giggable as its sturdier, looks better and also more compact that the Gator one. Probably lighter as well. Yours was £9 plus time, theirs is £108 plus shipping! No contest, you win 👍 You probably should get geared up for the projected incoming orders 👍🤣 Well done! I will weigh mine, hang on. EDIT - 1350g. It’s not as big as that Gator one though. Edited April 20 by Minininjarob 1 Quote Link to comment Share on other sites More sharing options...
Minininjarob Posted April 20 Author Share Posted April 20 If anyone else wants one I can make another, just message me and I’ll see what I can do. It’d be a fun project. Material cost/bit of money for my time/postage would be the cost. Wouldn’t be much though. . 1 1 Quote Link to comment Share on other sites More sharing options...
naxos10 Posted April 20 Share Posted April 20 Just put my order in😁 Quote Link to comment Share on other sites More sharing options...
Alien Posted April 20 Share Posted April 20 5 hours ago, BigRedX said: You need to paint it black though... Didn't the Stones say that first? Quote Link to comment Share on other sites More sharing options...
BassmanPaul Posted April 20 Share Posted April 20 The wood has a nice grain to it. It calls to me for a dark stain and a coat of protective varnish. Quote Link to comment Share on other sites More sharing options...
tauzero Posted April 20 Share Posted April 20 Is it good for metal? Quote Link to comment Share on other sites More sharing options...
nige1968 Posted April 22 Share Posted April 22 Bit O/T, soz, but someone really needs to invent one of these with an attached platform for a separate amp head. Anyway, your thing looks lovely, for what it's worth coming from a secondary school woodwork failure such as wot I is. Quote Link to comment Share on other sites More sharing options...
ahpook Posted April 22 Share Posted April 22 Lovely work ! Well impressed 👍 Quote Link to comment Share on other sites More sharing options...
Minininjarob Posted April 22 Author Share Posted April 22 1 hour ago, nige1968 said: Bit O/T, soz, but someone really needs to invent one of these with an attached platform for a separate amp head. Anyway, your thing looks lovely, for what it's worth coming from a secondary school woodwork failure such as wot I is. I was taking the same. I could make a reverse one to fit on top of the cabinet to hold the head BUT it would suffer from vibration issues and it would have to be carefully made to suit both the cab and the head. If it’s a small class D head it’s probably be better to just Velcro it to the top of the cab. Quote Link to comment Share on other sites More sharing options...
Minininjarob Posted April 22 Author Share Posted April 22 50 minutes ago, ahpook said: Lovely work ! Well impressed 👍 Thanks but its not as good in real life but I had to rush to make it. Quote Link to comment Share on other sites More sharing options...
ahpook Posted April 22 Share Posted April 22 14 minutes ago, Minininjarob said: Thanks but its not as good in real life but I had to rush to make it. I feel you do yourself a disservice, sir ! Lessons learned for your next project, I'm sure. Quote Link to comment Share on other sites More sharing options...
Minininjarob Posted April 22 Author Share Posted April 22 13 minutes ago, ahpook said: I feel you do yourself a disservice, sir ! Lessons learned for your next project, I'm sure. I prefer to use a hardwood they are easier to work with. 1 Quote Link to comment Share on other sites More sharing options...
tauzero Posted April 22 Share Posted April 22 5 hours ago, Minininjarob said: I was taking the same. I could make a reverse one to fit on top of the cabinet to hold the head BUT it would suffer from vibration issues and it would have to be carefully made to suit both the cab and the head. If it’s a small class D head it’s probably be better to just Velcro it to the top of the cab. Ikea used to do a laptop stand which is similar to what would be needed - a downward lip at the front to hook over the cab front and an upward lip at the back to rest the back of the amp on. The upward lip would need some surgery to accommodate any cables that needed to go through the amp rear. I don't think the Ikea stand would do the job, although I use one to tilt my combo. The Ikea laptop stand (no longer available from Ikea): https://www.ebay.co.uk/itm/386946235146 Quote Link to comment Share on other sites More sharing options...
Baloney Balderdash Posted April 23 Share Posted April 23 Really cool. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.