lidl e Posted May 26 Share Posted May 26 (edited) Anyone have one of these? It looks pretty good. Is there possibly anything smaller out there thay does the same thing? I can just about fit it on my board, but even a few mm smaller would be helpful. Would the power be needed for this for anything besides the led would anyone know? https://one-control.com/products/minimal-series-mosquito-blender-trail-with-bjf-buffer I'm doing some pretty crazy effects stuff recently amd im needing a bit of dry tone to define everything a bit better. Edited May 26 by lidl e Quote Link to comment Share on other sites More sharing options...
sifi2112 Posted May 26 Share Posted May 26 I had one a few years ago & should’ve kept it .. now I have a Boss LS-2 & Bright Onion Trails looper to achieve the same with my analog delay, which is way bigger lol doubt you’d find anything smaller .. they’re not cheap but nicely built & does the job well .. didn’t notice much difference with buffer switch engaged or not .. still worth it 1 Quote Link to comment Share on other sites More sharing options...
lidl e Posted May 26 Author Share Posted May 26 (edited) 6 minutes ago, sifi2112 said: I had one a few years ago & should’ve kept it .. now I have a Boss LS-2 & Bright Onion Trails looper to achieve the same with my analog delay, which is way bigger lol doubt you’d find anything smaller .. they’re not cheap but nicely built & does the job well .. didn’t notice much difference with buffer switch engaged or not .. still worth it Yeah, i have a switchblade pro on my bigger board which is killer, but i only have a small corner to fit this onto. It will be close.. I suppose i could put it under the board. Do you remember if you needed the power connection? I would turn the buffer off as my tuner has one already. Edited May 26 by lidl e Quote Link to comment Share on other sites More sharing options...
Al Krow Posted May 26 Share Posted May 26 4 minutes ago, sifi2112 said: I had one a few years ago & should’ve kept it .. now I have a Boss LS-2 & Bright Onion Trails looper to achieve the same with my analog delay, which is way bigger lol doubt you’d find anything smaller .. they’re not cheap but nicely built & does the job well .. didn’t notice much difference with buffer switch engaged or not .. still worth it I found the LS2 to be a little noisy / not completely silent. Does that chime with your experience? Quote Link to comment Share on other sites More sharing options...
lidl e Posted May 26 Author Share Posted May 26 (edited) 6 minutes ago, Al Krow said: I found the LS2 to be a little noisy / not completely silent. Does that chime with your experience? I've never had the ls2, but obviously I've been aware fornit for many years. 75% of people think it's the greatest pedal there is and 25% complain of noise and "tone suck" with it. I'd say it's about as good as it gets for thatcspecific utility, but i dont have the space for it. I went for an ehx switchblade pro over the ls2 for this purpose on my bigger board. Seemed to have better features and easier to operate. I love it, but its big. Edited May 26 by lidl e Quote Link to comment Share on other sites More sharing options...
sifi2112 Posted May 26 Share Posted May 26 I don’t have any issues with LS-2 & haven’t actually found it necessary to even see if it has any tone suck .. and I hate hiss / noise / suck etc .. there might be some but it isn’t obvious to me so far … Quote Link to comment Share on other sites More sharing options...
lidl e Posted May 26 Author Share Posted May 26 I think im gomna grab one of these. Fathers day is in two weeks. I'll ask for a thomann voucher even though i was planning on asking for socks! I'm going to have to daisy chain with with my tuner. Should be fine. Might have a bit of overhang on the edges. Quote Link to comment Share on other sites More sharing options...
itu Posted May 26 Share Posted May 26 I am the bad guy and ask, have ever considered a X-over? There are a few available, like KMA, Iron Ether, and Great Eastern FX. IE Divaricator is probably the least common of these three. 1 Quote Link to comment Share on other sites More sharing options...
lidl e Posted May 26 Author Share Posted May 26 34 minutes ago, itu said: I am the bad guy and ask, have ever considered a X-over? There are a few available, like KMA, Iron Ether, and Great Eastern FX. IE Divaricator is probably the least common of these three. No, but I'll look right now. This one is top of the list because space will only barely allow it and it does exactly what i need. Quote Link to comment Share on other sites More sharing options...
lidl e Posted May 26 Author Share Posted May 26 Yeah, that great eastern xo would be perfect. If i had the space I'd seriously consider it. I think it woild really tighten up the C4 and some of the crazier reverb toneprints i use, but on this board i dont have the space for it. Knowing me, I'd run it wide open anyway! I will run an empress paraeq deluxe before the blender so i can kind of do a bit of focusing, but yeah, that is a cool pedal for sure. The IE looks awesome as well. The KMA tyler is a bit much but i dig what it does and i could definitely utilise it! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.