jezzaboy Posted May 27 Share Posted May 27 (edited) Here we have a M2000 project. The active developed a fault a while back so I replaced it with a passive circuit and while I was at it, removed the back pickup as I wanted a L1000 set up. Madness I know but it seemed like a good idea at the time I loaned it out for a while but got it back and I have no need for it so here we are. The body is in good condition, just a few small marks, as is the neck. The 3 small knobs are where the active controls were, they have pots in there just to hide the holes and are not connected to anything. The 2 large knobs are the volume and treble. The bass plays fine in this passive set up. The piece of plastic hides the hole for the second pickup which I no longer have. I wired the passive set up myself but as I`m crap at soldering, you would be better to have the electrics re done hence the low price. Weight is 8.2 lb`s, I would prefer collection but if you want it posted for an extra £10, I will send it with the neck detached so bear this in mind. Please remember this is being sold at a silly price as a project. Paypal f^f or bank transfer. Edited May 28 by jezzaboy 2 Link to comment Share on other sites More sharing options...
Dan Dare Posted May 27 Share Posted May 27 Those G&L MFD pickups are plenty hot enough in passive mode. They're also the same as those fitted to US G&Ls. This is a bit of a bargain. I had one of these, but just couldn't get on with the neck (I've been playing J basses for ever).It was very well made and I wish I'd been able to bond with it as it was versatile and good sounding. GLWTS. 1 Link to comment Share on other sites More sharing options...
.thumb.jpg.bf36c6e93eefff39d4b0a452c85a7b15.jpg)
Recommended Posts