Gerainthjames Posted June 1 Share Posted June 1 (edited) Hi! What kind of Speakon cable would I need to connect this amp and cab below to each other? I can't figure out if NL2, NL4 needed, of if it doesn't matter in this instance? Many thanks! https://www.thomann.de/gb/markbass_little_mark_iv.htm https://www.thomann.de/gb/markbass_mb58r_121_energy_box.htm Either of the following any good? https://www.thomann.de/gb/pro_snake_tpl_15_ll_02.htm https://www.thomann.de/gb/pro_snake_speaker_twist_cable_1_5m_2x4.0.htm Edited June 1 by Gerainthjames Quote Link to comment Share on other sites More sharing options...
lidl e Posted June 2 Share Posted June 2 (edited) That figrst one looks right to me. Edited June 2 by lidl e 1 Quote Link to comment Share on other sites More sharing options...
jay bass Posted June 2 Share Posted June 2 It doesnt matter both will work fine NL2 will have 2 wires inside the cable which is all you need The NL4 will have 4wires inside the cable for additional connection purposes 1 Quote Link to comment Share on other sites More sharing options...
PaulWarning Posted June 2 Share Posted June 2 NL4 plugs will not work with a NL2 connector but NL2plugs will work with an NL4 connector, most modern PA's have NL4 connectors, so no problem. https://www.amazon.com/review/R3CPRR8V9Q7C7C/ref=cm_cr_srp_d_rdp_perm 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.