EICH T900

[BassAdder60]

Hey !! Anyone used or using the EICH T900 amp ? 
 

Im curious to it being a good match with a Barefaced ST ? 

[fretmeister]

I had a TecAmp, basically the same thing, and I found it to be very clean and clear. 

 

Not really my bag, but it might be for you. 

[BassAdder60]

I’m trying to find out the clearance under the amp ( to clear a cab top handle ) 

[fretmeister]

I think you’ll need taller feet.

[ebenezer]

I have one and the feet are tiny so will definitely not clear the handle....I put two pieces of foam sponge either side of the handle....putting larger feet on the amp is a no no.

[BassAdder60]

I have a rubber mat I can lay on top so I think that will help 

[BassAdder60]

55 minutes ago, ebenezer said:

I have one and the feet are tiny so will definitely not clear the handle....I put two pieces of foam sponge either side of the handle....putting larger feet on the amp is a no no.

Just out of interest why can’t you stick larger rubber feet on the bottom ? 

[fretmeister]

I’d stick bigger feet over the existing ones.

[BassAdder60]

49 minutes ago, fretmeister said:

I’d stick bigger feet over the existing ones.

Is that possible?  I would have thought taller feet beside them or remove and fit taller feet ? 

[ebenezer]

I suppose you could stick taller feet on to the existing one's but I think it will look messy imho. 

[ossyrocks]

The handle on top of a ST is at the back, so there's plenty of room for the amp on top in front of the handle.
With my Tecamp Puma 900 I have to use some sticky matt between the amp and cab otherwise the amp tends to wander.

 

Rob

[BassAdder60]

I wouldn’t stick them on to existing either beside or replace them with taller feet I think 

Edited June 5, 2024 by BassAdder60

[BassAdder60]

Just now, ossyrocks said:

The handle on top of a ST is at the back, so there's plenty of room for the amp on top in front of the handle.
With my Tecamp Puma 900 I have to use some sticky matt between the amp and cab otherwise the amp tends to wander.

 

Rob

Apologies my plans have changed regarding the ST 

 

This is in relation to a LFSYS Monaco cab