Providence Dual Bass Station £85.00 Posted UK - *SOLD* £100 Leicester

[Oldman]

Dual Bass Station: Not owned this little Gem long, I like it’s uncluttered it’s approach. I bought ‘cos of two distinct tones, it does that well, however, I have spotted Two Leaf pedal that does 3! No brainer. Velcro (easily removed) on the bottom, Complete with 12Volt PSU. A few chips on the Paint commensurate with use, nothing to fret about.
 

SPECIFICATIONS

Controls: BASS, MID, MID FREQ, TREBLE, MASTER / AB each chanel, MUTE, A/B

Connectors: Standard 1/4-inch phone jacks (IN-A, IN-B, OUT, TUNER),

DC12V input jack

Electrical characteristics: BASS 60Hz±14dB peaking/MID 150Hz~1kHz±14dB peaking/TREBLE 3kHz±14dB peaking/MASTER -~+10dB/Output noise level -95dBu or less (IHF A.W.T.D)/Harmonic distortion 0.01% or less (Output 0dBu)

Power Supply: Supplied AC adaptor(PAP-712DCJ for North America and Japan, PAP-712DCE for Europe, PAP-712DCU for UK)

Power Consumption: DC12V, 80mA

Dimensions: 122(D)x101(W)x58(H)mm

Weight: Approx 370 g, not incl. AC adaptor.

Thanks for L👀king

Edited September 9 by Oldman

[Oldman]

■Main Features
●The Dual Bass Station is a high-performance bass preamplifier with dual inputs and EQ channels. With a single bass guitar plugged into the IN-A input you can switch between the A and B channel EQ settings as required. Both channels feature versatile 3-band equalizers that are ideal for use with a wide range of musical genres and playing styles. The parametric midrange controls allow detailed tonal adjustment.
●Great care has been taken in the selection and implementation of all signal-carrying parts and circuitry, achieving overall specifications and sonic per- formance that rival high-end audio equipment. The internal circuitry is powered by a 24-volt supply, allowing the expressive dynamic range of bass guitar to come through with maximum impact and clarity.
●EQ controls employ precision potentiometers with a control curve that has been specially designed for maximum subjective linearity.
■Controls and Connectors
1BASS (A CHANNEL)/5BASS (B CHANNEL):
Boosts or cuts the bass frequency range. Response is flat (no boost or cut) at the center click position.
2MID (A CHANNEL)/6MID (B CHANNEL):
Boosts or cuts the mid-frequency range. The center frequency of the mid-frequency range is set via the corresponding MID FREQ control. Response is flat (no boost or cut) at the center click position.
3TREBLE(A CHANNEL)/7TREBLE(B CHANNEL):
Boosts or cuts the treble frequency range. Response is flat (no boost or cut) at the cen- ter click position.
4MASTER(A CHANNEL)/8MASTER(B CHANNEL):
Adjusts the output level. At the center click position the output level is approximately equal to the input level.
9A ch MID FREQ/10B ch MID FREQ:
Sets the center frequency of the mid-frequency range that will be affected by the corre- sponding MID control.
11MUTE LED:
Lights (red) when output from the OUT jack has been muted via the MUTE footswitch.
12Channel A LED:
Lights (green) when the A channel has been selected via the A/B footswitch.
13Channel B LED:
Lights (orange) when the B channel has been selected via the A/B footswitch.
14MUTE Footswitch:
Alternately mutes and un-mutes output from the OUT jack.
15A/B Footswitch:
Alternately selects the A or B channel.
16IN-A Jack:
This is the input jack for channel A. The output from a bass guitar or other effect unit should be connected here.
When no plug is inserted into the IN-B jack (below), the signal fed to the IN-A jack is routed to both the A and B channels so you can set up two different EQs and switch between them as required. When using a single bass guitar, always connect it to the IN-A connector.
17IN-B Jack:
The IN-B jack can be used to connect a second bass guitar to the DBS-1. When instru- ments are connected to both the IN-A and IN-B jacks, the instrument connected to IN-A will go through channel A, and the instrument connected to IN-B will go through chan- nel B.
18TUNER:
Connect to an external tuner when required. The TUNER output jack is active even when the main output is muted. When two instruments are connected to the DBS-1 the signal from the channel selected by the A/B footswitch will be output via the TUNER jack. The input signal is fed directly to the TUNER jack without being affected by any of the DBS-1 EQ or level controls.
19OUT Jack:
Outputs the processed signal from the DBS-1 to an amplifier or mixer.
20DC12V IN Connector:
The DC output from the supplied AC adaptor should be connected here.

 

[franzbassist]

Brilliant piece of kit. I have used one for years and it's just rock solid.  Great price too!

[PhilAllGaps1]

Hi Franz,

I will take this, I have one already but need to put a ‘B’ rig together.

How would you like to be paid?

 

Phil.

[Oldman]

Franz!

 

Would you like to buy it?

 

Oldman ☑️

Edited September 7 by Oldman

[PhilAllGaps1]

Yes please!

Can you send payment details please.

Phil.