Yamaha DBR10 Powered Speaker Cabinet - *SOLD* £190 Lancaster

[ash]

A nice portable powered speaker cab, handy as a monitor, vocal PA or keyboard/instrument amp. The neutrik locks on the inputs have broken but the inputs work using a jack. The connectors can be replaced - they cost under a fiver. 
Works as it ought to - it’s been used lightly as a keyboard amp and monitor so has some scuffs and cosmetic blemishes to the grill. They cost around £365 new. 
I can post in the UK only for £16
 

 

 

 

Yamaha blurb - 

 

Description

The DBR10 Active PA speaker features the same Yamaha state-of-the-art DSP technology inherited from its predecessors, ensuring superior performance and versatility, and safe, consistent operation.

The DBR10 can project deep bass, clear midrange and accurate high frequencies to the outer-most edges of a very wide coverage area and can boast 700W of power.

The design incorporates an optimised 50° wedge angle for floor monitoring use and is also, for its size, the most portable powered speaker currently offered by Yamaha.

Features

Equipped with: 10" + 1"

Power: 700 W Peak, 350 W RMS

Peak SPL: 129 dB

Frequency range: 55 - 20,000 

Internal 2 channel mixer with XLR, TRS and RCA inputs

4-Stage fan

Monitor tilt

2 x M8 Rigging points

Dimensions (W x H x D): 308 x 493 x 289 mm

Weight: 10.5 kg

Tech spec

Speaker type - 2-way, Bi-amp powered speaker, Bass-reflex type

Frequency range (-10dB) - 55Hz - 20kHz

Nominal coverage H - 90°

Nominal coverage V - 60°

Components LF - Diameter:10" cone, Voice Coil:2", Magnet:Ferrite

Components HF - Diaphragm:1", Type: 1" throat compression driver, Magnet:Ferrite

Crossover - 2.1kHz: FIR-X tuning™ (linear phase FIR filter)

Output power - Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W)

Maximum output level (1m; on axis) - 129dB SPL

I/O connectors - INPUT1: Combo x1, INPUT2: Combo x 1 RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1 CH2 Mix)

Processors - D-CONTOUR: FOH/MAIN, MONITOR, OFF

Heat dissipation - Fan cooling, 4 speeds

Power requirements - 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz

Power consumption - 60W(1/8 Power Consumption), 18W(Idle)

Cabinet material - Plastic

Finish - Black

Handle - Top x 1 

Pole socket - 35mm (Bottom x 1)

Dimensions:

-W - 308mm (12.1")

-H - 493mm (19.4")

-D - 289mm (11.4")

Net weight - 10.5 kg (23.2 lbs)

 

 

 

Edited July 30 by ash
Sold elsewhere