paul_5 Posted October 10 Share Posted October 10 (edited) Hi all, I've fitted a passive crossover in my 1x12" cabinet and it now has a tweeter, thing is, I\d like to raise the crossover frequency so that just the 'sparkly bits' go through my tweeter, and have more of my signal going through the woofer. It's a crossover from a Peavey 2x10" with two capacitors, an inductor and an attenuator as shown below: 410TVX.pdf is it simply a case of using the 1/2π√LC (L is 200µH, caps are 3.3µf and 15µf) to calculate this, or is there something else I need to consider. I was hoping to just substitute different values of capacitor to achieve this (obviously with the correct power rating!) and thought I'd ask the BC collective for any advice or ridicule before setting to work. TIA Edited October 10 by paul_5 Quote Link to comment Share on other sites More sharing options...
itu Posted October 10 Share Posted October 10 @Bill Fitzmaurice will answer you in minutes, after he sees your question. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.