Jump to content
Why become a member? ×

Musicman stingray pickup pole.


Recommended Posts

Hi peeps

Had a stringray for awhile and could never get it to sound good. Put some new strings on it and got it sounding loads better except for the E string. It's dead and lifeless and has much less volume than all the other strings. Looking at the pickup the pole under the string is much lower than the ones under the A D G strings. Any ideas if this can be raised up? And if so and one got a video demonstration. 

Thanks

Matt 😊

Link to comment
Share on other sites

That’s normal for a Ray, regarding the pole piece on the E. 

 

I think it’s much more likely to be something else, for example a duff string or issue with the nut or saddle. 
 

If you are still unsure about the pole, try little magnets first before perhaps wrecking the pickup, as some people have done that on the G string in the past.  
 

Good luck 👍

Edited by Chiliwailer
Link to comment
Share on other sites

I'm really not sure this is normal. It sounds very muted and is about 1/3 the volume of the other strings. I've contacted musicman to see if they have any ideas or possibly just buy a new pickup. 

Link to comment
Share on other sites

4 hours ago, MrLally said:

I'm really not sure this is normal. It sounds very muted and is about 1/3 the volume of the other strings.

…it’s ‘normal’ for the pole piece being lower - not the tone issue! 😃

 

Like Kev and me said, could be a duff string. 
 

And again, an issue with the nut or saddle could deaden a string. 
 

All worth looking at before buying a new pup. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...