DIY Pedalboard - 3d printed & Aluminium Extrustions 400mm x 300mm

[Woodinblack]

It does mount with two bolts through the bottom (note that mine aren't like the ones in the picture, I used the adjustable feet that came with the original board, as I got the power bar separately later, and prefered the other feet.

Can't see what the bolt is offhand, other than it measures 7mm with a caliper across.

 

 

[SpondonBassed]

3 hours ago, Si600 said:

@Woodinblack has one, we could ask him to measure it up....

 

...behind the bike sheds preferably.

[stewblack]

5 hours ago, MichaelDean said:

I keep having intrusive thoughts about integrating one of the Harley Benton PowerBars into one of these. I don't need more power on my pedalboard, I don't even need a new booard. But I'm still thinking about it 😅

 

https://www.thomann.co.uk/search_dir.html?smcs=81f6e8_6233&sw=spaceship power bar&sp=bloomreach&category[]=GIEFNT&cme=true&filter=true

They are absolutely brilliant.

[Woodinblack]

5 hours ago, stewblack said:

They are absolutely brilliant.

 

They are, and really low noise. Wouldn't change mine. Well, I might for the battery one now.