Jump to content
Why become a member? ×

FS/FT Sequential circuits Prophet six
£1900
Forest of Dean


Recommended Posts

For sale recently purchased Prophet six in fantastic condition including Thon heavy duty flight case, instruction booklet, power supply.
Specs are

 

Prophet-6 Specifications

OSCILLATORS

Two newly designed, discrete VCOs per voice

Continuously variable wave shape (triangle, sawtooth, pulse, square) per oscillator

Pulse width per oscillator

Hard sync: oscillator 1 syncs to oscillator 2

Triangle sub-octave generator (oscillator 1) per voice

Low frequency mode (oscillator 2)

Keyboard tracking on/off (oscillator 2)

Oscillator slop amount for increased tuning instability, from subtle to extreme

MIXER

Oscillator 1 amount

Oscillator 1 sub-octave amount

Oscillator 2 amount

White noise amount

HIGH-PASS FILTER

Two-pole, resonant, high-pass filter per voice

Bi-polar filter envelope amount

Velocity modulation of envelope amount

Keyboard tracking: off, half, full

LOW-PASS FILTER

Four-pole, resonant, low-pass filter per voice, inspired by the original Prophet 5 filter

Filter can be driven into self-oscillation with the Resonance control

Bi-polar filter envelope amount

Velocity modulation of envelope amount

Keyboard tracking: off, half, full

FILTER ENVELOPE

Four-stage (ADSR) envelope generator

AMPLIFIER ENVELOPE

Four-stage (ADSR) envelope generator

Velocity modulation of envelope amount

LOW FREQUENCY OSCILLATOR

Five wave shapes: triangle, sawtooth, reverse sawtooth, square, and random (sample and hold)

Clock sync (internal or external MIDI clock)

Initial amount

Mod destinations: oscillator 1 frequency, oscillator 2 frequency, oscillator 1 and 2 pulse width, low-pass filter cutoff, high-pass filter cutoff

POLY MOD

Sources: filter envelope (bi-polar) and oscillator 2 (bi-polar)

Destinations: oscillator 1 frequency, oscillator 1 shape, oscillator 1 pulse width, low-pass filter cutoff, high-pass filter cutoff

AFTERTOUCH

Source: channel (mono) aftertouch with bi-polar amount

Destinations: oscillator 1 frequency, oscillator 2 frequency, LFO amount, amplifier envelope amount, low-pass filter envelope amount, high-pass filter envelope amount

CLOCK

Master clock with tap tempo

BPM control and display

MIDI clock sync

ARPEGGIATOR

Selectable note value: 16th note, 8th note triplet, 8th note, dotted 8th note, quarter note

One, two, or three octave range

Up, down, up/down, random, and assign modes

SEQUENCER

Polyphonic step sequencer with up to 64 steps and rests

EFFECTS

Stereo analog distortion

Dual, 24-bit, 48 kHz digital effects, including: reverb (room, hall, plate, spring), delay (full bandwidth digital delay and emulated bucket brigade), chorus, flanger, phase shifters, and ring modulator

Delay sync

True bypass maintains fully analog signal path when digital effects are off

PERFORMANCE CONTROLS

Full-sized, semi-weighted, 4-octave keyboard with velocity and aftertouch

Backlit pitch and mod wheels

Spring-loaded pitch wheel with selectable range per program (1 to 12 semitones up and down)

Transpose controls for an 8-octave range

Hold switch latches held notes on

Polyphonic glide (portamento)

Unison (monophonic) mode with configurable voice count, from one to all six voices, and key modes

Preset switch: when off, the front panel is live; what you see is what you hear

PATCH MEMORY

500 user and 500 factory programs in 10 banks of 100 programs each

Direct program access, including Prophet 5-style single-button access to the current set of 10 programs

IN/OUT

Left/mono and right audio outputs (2 x 1/4” phone jack)

Headphone output (stereo, 1/4” phone jack)

MIDI in, out, and thru ports

USB for bidirectional MIDI communication

Low-pass filter cutoff expression pedal input

Volume expression pedal input

Sustain footswitch input

Sequencer start/stop footswitch input

POWER

IEC AC power inlet for internal power supply

Operates worldwide on voltages between 100 and 240 volts at 50 to 60 Hz; 30 watts maximum power consumption

PHYSICAL SPECS

32.3” L x 12.7” W x 4.6″ H (82.0 cm x 32.3 cm x 11.7 cm)

20.0 lbs (9.5 kg)

Walnut end panels

 

 

 

 

IMG_0523.jpeg

IMG_0524.jpeg

IMG_0525.jpeg

IMG_0526.jpeg

IMG_0527.jpeg

IMG_0528.jpeg

IMG_0529.jpeg

Edited by paul j h
Remove trade option
  • Like 3
Link to comment
Share on other sites

  • 5 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...