0175westwood29 Posted Sunday at 09:12 Share Posted Sunday at 09:12 i know you dont want to maybe spend money on anything but i see maybe two ways use your diago into a gigrig distributor that then powers the hx, use another isolator of that to then power the tuner. or you could grab a strymon Ojai and a 2 into 1 double lead that will run the hx and you have three outputs left to power the tuner from. 1 Quote Link to comment Share on other sites More sharing options...
Dazm66 Posted Sunday at 09:28 Share Posted Sunday at 09:28 On 04/11/2024 at 18:40, Sibob said: The tuner in the Stomp is excellent in my experience, I just don’t want to waste a switch on it in this setup. I have space for an external tuner, so why not. Si I’m guessing you already know you can activate the tuner by pressing "Action" and "Page >" buttons together? Quote Link to comment Share on other sites More sharing options...
jrixn1 Posted Sunday at 14:31 Share Posted Sunday at 14:31 Joyo ZGP? I've not used one myself but read about them here previously. Quote Link to comment Share on other sites More sharing options...
Sibob Posted Sunday at 21:58 Author Share Posted Sunday at 21:58 Sorry for the radio silence on this thread, been a hectic weekend of ill family members and changes plans. I appreciate everyone mucking in their thoughts on this! 10 hours ago, 0175westwood29 said: i know you dont want to maybe spend money on anything but i see maybe two ways use your diago into a gigrig distributor that then powers the hx, use another isolator of that to then power the tuner. or you could grab a strymon Ojai and a 2 into 1 double lead that will run the hx and you have three outputs left to power the tuner from. For sure, that’s the thing though, by the time I’ve bought a Distro and an Isolator from Gigrig (as used they’re quite rare) I’m not far off getting a used Cioks Sol or Ojai as you say. This exercise is trying to get the quietest setup (ie isolated if possible) for as little money as possible, utilizing the fact that I already have a Diago PowerStation and the original Stomp PSU. 7 hours ago, jrixn1 said: Joyo ZGP? I've not used one myself but read about them here previously. I was vaguely aware of these, it would work do isolate the tuner, but doesn’t have enough output to power the HX Stomp. That said, I’m still yet to find an answer to this question (which I haven’t asked here yet). Does using an isolation block on just one pedal technical isolate both pedals from one another? Is it actually not necessary to isolate both pedals from one another?! Cheers Si Quote Link to comment Share on other sites More sharing options...
Woodinblack Posted Sunday at 22:29 Share Posted Sunday at 22:29 No - the joyo thing is a filter, ir removes some noise from the power source, but in no way isolates the power from each other. I used one because it stopped a zoom that I was using at the time from interfering with the wireshark wireless I was using at the time. It worked, but later on I had to get an isolated power supply for another pedal. 1 1 Quote Link to comment Share on other sites More sharing options...
Sibob Posted Sunday at 22:36 Author Share Posted Sunday at 22:36 I think where I’m getting to is realising that I should just suck it up and get another Cioks Sol haha. Easier to just set it up and forget, because it’s doing everything that I need. Cheers Si Quote Link to comment Share on other sites More sharing options...
0175westwood29 Posted Sunday at 23:24 Share Posted Sunday at 23:24 46 minutes ago, Sibob said: I think where I’m getting to is realising that I should just suck it up and get another Cioks Sol haha. Easier to just set it up and forget, because it’s doing everything that I need. Cheers Si you could also look at the fender small power supply thats basically a cheaper styrmon, had a big one and it was sound 89 quid for the level 5 and your done https://www.gak.co.uk/en/fender-engine-room-lvl5-power-supply/942152?gclsrc=aw.ds&gad_source=1&gclid=Cj0KCQiA0MG5BhD1ARIsAEcZtwSP0b3_sADd07Oo9BB3LQt1rSajxT9yA9W4335hHrjYw-g3xaVsgNcaAswxEALw_wcB Quote Link to comment Share on other sites More sharing options...
Higgie Posted Sunday at 23:48 Share Posted Sunday at 23:48 1 hour ago, Sibob said: Sorry for the radio silence on this thread, been a hectic weekend of ill family members and changes plans. I appreciate everyone mucking in their thoughts on this! For sure, that’s the thing though, by the time I’ve bought a Distro and an Isolator from Gigrig (as used they’re quite rare) I’m not far off getting a used Cioks Sol or Ojai as you say. This exercise is trying to get the quietest setup (ie isolated if possible) for as little money as possible, utilizing the fact that I already have a Diago PowerStation and the original Stomp PSU. I was vaguely aware of these, it would work do isolate the tuner, but doesn’t have enough output to power the HX Stomp. That said, I’m still yet to find an answer to this question (which I haven’t asked here yet). Does using an isolation block on just one pedal technical isolate both pedals from one another? Is it actually not necessary to isolate both pedals from one another?! Cheers Si If you have two pedals powered from the same supply, and you isolate one of them, then the other should also be isolated, as there are only two pedals and neither can “see” the other. That’s my understanding of it anyway. Distributor and Isolator is the way to go I reckon. GigRig Virtual Battery will also act as a single isolator. Quote Link to comment Share on other sites More sharing options...
Sibob Posted Monday at 12:21 Author Share Posted Monday at 12:21 12 hours ago, 0175westwood29 said: you could also look at the fender small power supply thats basically a cheaper styrmon, had a big one and it was sound 89 quid for the level 5 and your done https://www.gak.co.uk/en/fender-engine-room-lvl5-power-supply/942152?gclsrc=aw.ds&gad_source=1&gclid=Cj0KCQiA0MG5BhD1ARIsAEcZtwSP0b3_sADd07Oo9BB3LQt1rSajxT9yA9W4335hHrjYw-g3xaVsgNcaAswxEALw_wcB Don’t think it will fit under a PT Nano though. Thanks though. Si Quote Link to comment Share on other sites More sharing options...
Sibob Posted Monday at 12:33 Author Share Posted Monday at 12:33 12 hours ago, Higgie said: If you have two pedals powered from the same supply, and you isolate one of them, then the other should also be isolated, as there are only two pedals and neither can “see” the other. That’s my understanding of it anyway. Distributor and Isolator is the way to go I reckon. GigRig Virtual Battery will also act as a single isolator. Yeah that’s my understanding too, makes sense right?! lol. I’ll keep my eye out for some used Gig Rig in that case! Cheers Si Quote Link to comment Share on other sites More sharing options...
Woodinblack Posted Monday at 12:37 Share Posted Monday at 12:37 Wow that isolator seems expensive. Not really suprising as it is everything a normal power supply does. So if you have now decided to go for a new power supply woudln't any old isolated supply work? Those £20-30 isolated power supplies work really well and are very low profile, I used those all the time until I went to the HB power strips Quote Link to comment Share on other sites More sharing options...
0175westwood29 Posted Monday at 14:16 Share Posted Monday at 14:16 1 hour ago, Sibob said: Don’t think it will fit under a PT Nano though. Thanks though. Si ah thought it might squeeze under back to the cioks or strymon it is then i guess Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.