kuetsum Posted November 29 Share Posted November 29 Any cheap alternative? PVC/wood cc cut? 3D print service from web? Would like to attach a on-on-on switch to the control plate for coil tap but don't want to ruain the original one or drill the body for value issue.. Quote Link to comment Share on other sites More sharing options...
fergs40 Posted December 2 Share Posted December 2 Buy a spare from the manufacturer of your bass and use that? Quote Link to comment Share on other sites More sharing options...
tauzero Posted December 2 Share Posted December 2 I have two basses with identical control cavities and lost the cover for one. I got a sheet of ABS https://www.ebay.co.uk/itm/262093434727 and used masking tape to roughly follow the lines of the edge of the existing cover, then drew round the cover on the masking tape. I scored along the straight edges and broke the ABS to give a rough shape, then used sandpaper to get it properly to shape. Drilled and countersank holes for the screws, and all was well. 1 Quote Link to comment Share on other sites More sharing options...
uk_lefty Posted December 3 Share Posted December 3 What is it you need? I've got a spare off a Harley Benton jazz that you could have for nothing, drill it, do whatever with it. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.