Favourite headstock design? Just for fun...

[Grooverjr]

Kubicki factor. Not strictly a headstock but.....phwoar!

 

Of my current basses, the ACG angled headstock is my favourite 

 

[Terry M.]

Totally dig the Warwick headstock. 

[Stub Mandrel]

On 07/01/2025 at 15:32, Terry M. said:

Totally dig the Warwick headstock. 

 

But what do you feel about the Warwick headstock?

[AlexDelores]

9 minutes ago, Stub Mandrel said:

 

But what do you feel about the Warwick headstock?

If you read all 3 of those comments out loud In one go, Robert Trujillo will appear.

[Terry M.]

3 minutes ago, AlexDelores said:

If you read all 3 of those comments out loud In one go, Robert Trujillo will appear.

I typed it out once and once only. No idea how it appeared 3 times 🤔

[Terry M.]

18 minutes ago, Stub Mandrel said:

 

But what do you feel about the Warwick headstock?

Now I can only see one of my comments as should be and not 3. Can you still see 3? Very weird. 

[Woodinblack]

12 minutes ago, Terry M. said:

Very weird. 

 

Yeh, spooky how stuff like that happens

[AlexDelores]

Just now, Terry M. said:

I typed it out once and once only. No idea how it appeared 3 times 🤔

Ah well, I agree with all 3 comments. They are very nice headstocks.

[Terry M.]

24 minutes ago, Woodinblack said:

 

Yeh, spooky how stuff like that happens

Just a bit 🤔

Edited January 8 by Terry M.

[Stub Mandrel]

1 hour ago, Terry M. said:

Now I can only see one of my comments as should be and not 3. Can you still see 3? Very weird. 

 

I think a moderator has nuked the two redundant versions.
 

Did you post it when looking at an earlier page than the last one? Sometimes nothing appears to happen so you click again, and again...

[Owen]

This is my fave.

[Terry M.]

5 hours ago, Stub Mandrel said:

 

I think a moderator has nuked the two redundant versions.
 

Did you post it when looking at an earlier page than the last one? Sometimes nothing appears to happen so you click again, and again...

To be honest I can't remember if that was the case. 

[Doctor J]

10 hours ago, Owen said:

This is my fave.

The three separate string tree efforts, when one bar would provide uniformity of break angle simply and cleanly, for me ruin what would be an otherwise tasty looking design. It just looks messy, like they never really thought through what they were trying to achieve and bodged a solution from the parts bin.

 

[Terry M.]

13 hours ago, Stub Mandrel said:

 

I think a moderator has nuked the two redundant versions.
 

Did you post it when looking at an earlier page than the last one? Sometimes nothing appears to happen so you click again, and again...

Actually YES I remember having to click on the reply button more than once because nothing was happening. Thanks for helping me to remember. I'll know not to do that again going forward 😊

[sprocketflup]

1 hour ago, Doctor J said:

The three separate string tree efforts, when one bar would provide uniformity of break angle simply and cleanly, for me ruin what would be an otherwise tasty looking design. It just looks messy, like they never really thought through what they were trying to achieve and bodged a solution from the parts bin.

 

I wonder how much force there is on those two little screws? 

[Doctor J]

Not enough to strip the wood, it appears.

[sprocketflup]

Indeed. If I was building that bass though, I'd drill straight through, add bigger bolts and chuck some nuts and washers on the back too, just in case

[neepheid]

I had one of those bar type retainers pull out of the face of the headstock before - I won't use them again.

[sprocketflup]

1 minute ago, neepheid said:

I had one of those bar type retainers pull out of the face of the headstock before - I won't use them again.

Have you? Its a shame because I agree with Doctor J that they are a more elegant solution to the break angle issue

[neepheid]

These are my weapon of choice these days.  Yes, it does mean that one string is not quick release, but the way it's made means it's compact.  There's no need for anything on the lowest string - it's close enough to the nut that if you put enough winds on the tuner post it will make a fine break angle without assistance.

Also, these units have the added benefit that if the original 2 string round tree is in a place where it's not in line with one of the tuners, then you can re-use the existing hole for one of the screws in the new retainer, so no holes to fill, and you can screw it down, make sure it's straight then use the retainer itself as its own guide/template for the second pilot hole.

 

Edited January 9 by neepheid

[neepheid]

1 minute ago, sprocketflup said:

Have you? Its a shame because I agree with Doctor J that they are a more elegant solution to the break angle issue

 

 

 

That's a colloquial expression of surprise, right?

 

But in case you're serious, yes, that genuinely happened, I did not make it up.

 

 

[neepheid]

From this:

 

 

To this:

 

 

And another thing - if your truss rod adjusts at the headstock, wouldn't the bar frustrate that, if placed to catch all strings?

[Doctor J]

The bar is used on almost every Floyd Rose equipped guitar, many of which have headstock adjusted truss-rods. It's not an issue, in my experience, when it comes to truss-rod adjustment.

 

I agree with you on the 4-string one, though, I've done the same on every 4 I have, either that one or the Hipshot one.

[Doctor J]

But the bar on a 5 string is not an unusual feature across other brands.

[sprocketflup]

38 minutes ago, neepheid said:

 

 

 

That's a colloquial expression of surprise, right?

 

But in case you're serious, yes, that genuinely happened, I did not make it up.

 

 

Yes, it is, I wasn't suggesting that you made it up.