JHS Emperor v2 : analog Chorus and Vibrato pedal £150 London

[sdbass]

Unused, mint pedal. Only used once to test it before listing. 

Purchased for a project but ended up not using it.

Price includes shipping in the UK

 

JHS' blurb below!

 

The JHS Emperor V2 is a true analogue bucket brigade Chorus and Vibrato Pedal with tap tempo and expression control, waveform selection, TRS stereo output and active EQ.

The Emperor is a vintage style effect that absolutely nails the hard to find sound of the Arion SCH-1 stereo chorus but its also a do it all modulation solution whether you want a subtle sheen, convincing rotary simulation or seasick vibrato, vibrato mode removes all the dry signal for true pitch modulation (Boss VB-2 style). It utilizes a Bucket Brigade 3207 chipset to deliver the warmth of '80s style analogue chorus pedals with enough control to put you in command of every aspect of the Emperor’s voice. The tone control has been improved by using an active EQ that functions as a tilt, noon is flat, turning to the left boosts highs and cuts lows while turning right boosts lows and cuts highs giving much more tone shaping capability without losing any low end sometimes found with chorus/vibrato pedals. Control the rate of the effect with either the speed knob, tap tempo footswitch or through the side mounted jack, the jack allows you to plug in an external tap tempo controller or an expression pedal for variable control in real time (side mounted switch selects between tap switch or expression pedal in), you can even slave the pedal to other tap controlled pedals for rhythmic consistency across all your effects (e.g. JHS Panther Cub Delay and Unicorn pedals). The Depth knob controls the amount of modulation, a switch selects between chorus and vibrato effects and a waveform switch selects between sine, square and triangle waveform types.

The JHS Emperor V2 has a hidden stereo trick up its sleeve, plugging a TRS splitter cable in to the output jack will give true stereo output for use with two amps. An internal switch changes from buffered to true bypass operation, the high quality buffer helps drive long cable runs and complex pedal setups while restoring high end loss. Whether spreading its warm tones or icy sheen to a pristine sounding stereo rig or utilising an external expression pedal for realistic rotary speaker sounds on a blues gig, the Emperor can do it all.

Features

Vintage style analogue bucket brigade chorus and vibrato pedal

Switch to select between chorus and vibrato, vibrato removes dry signal for true pitch modulation

Waveform switch selects between sine, square and triangle waveform types

Active EQ tone knob that functions as a tilt

Set modulation speed multiple ways: speed knob, tap tempo footswitch, expression pedal or slave in

1/4" Input jack for external tap tempo/slave or expression pedal (side mounted switch selects input)

Depth knob controls the amount of modulation

Volume control knob

Plugging a TRS splitter cable in to the output jack will give true stereo output

Switchable between buffered and true bypass (internal switch)

Convenient top mounted input and output jacks

9 V Power jack (no battery connector)

Made in the USA

4 Year warranty

Tech Specs

Width: 66 mm (2.6")

Length: 122 mm (4.8")

Height (excluding knobs): 41 mm (1.6")

Power Draw: 57 mA

Manufacturer Part Number: 650415211869

UPC-A: 650415211869