Shaving your neck

[Owen]

So, I have an early Korean MTD Kingston I won when I was playing Ebay roulette many, many years ago. It has been roundly abused through the years with multiple pickup/preamp combos going in there. I should have kept the Audere preamp with the Low-Z switch . It was intense. Anyway, I LOVE the neck on it. It is (apparently) asymmetric. It is quite thin and just feels fabulous in my hand. I have other basses and sometimes wonder if I could have the necks re-carved into something similar. I know that if I change the mass of the wood then the way the instrument responds will change. It is entirely possible that I should not be trying to fix things which are already working. But I cannot help but wonder. Is this a thing people have done?

[gjones]

I know that Geddy Lee had the neck on his first Jazz Bass, which was a 70s model, shaved. That's why his signature model has such slim neck front to back.

 

I've owned a 3 Geddy Lee basses over the years and, out of curiosity, I swapped the neck on one of them. The neck I fitted to the Geddy was a much chunkier Allparts neck with a rosewood board and it definitely did make a difference to the sound.

 

The Geddy Lee is a pretty twangy Jazz Bass but with the bulkier neck fitted it sounded much darker and fuller. After a few weeks I fitted the old neck back and the twangy Geddy Lee sound returned.

 

So if you do get the neck shaved on your bass, I suspect that you'll notice a difference in tone.

[Owen]

This is why I need to discuss this with real people and not just the rabid enabler in my head. I actually like the noise all of my basses make and I should probably leave well enough alone. Thanks.

[tauzero]

I have a 1987 Warwick JD Thumb which has a lovely slim neck. I bought a 2000 Thumb which has a far thicker neck and had it defretted and the neck reprofiled to be the same as the JD Thumb. There was a slight issue as the 2000 has a volute which goes over the end of the trussrod and removing this broke through into the trussrod channel, but Joe fixed this (and later Jon Shuker did too when he replaced the wenge unfretboard with a plain ebony one).