Restringing your double bass

[JPJ]

I’m about to change the strings on my Boosey Hawkes excelsior for the first time in my ownership. I have a new set of light Spirocores sitting here ready to go on, and I’ve watched videos on YouTube from the likes of Geoff Chalmers on the ‘how to’ but before I dive in, I thought I’d ask the Basschat massive whether you have any cunning tips, do’s/don’ts etc?

 

Also, how long do new double bass strings take to stretch and settle? I have a gig on Sunday so I’ll hold off changing strings until after then, but it would be good to know the general rule of thumb on this.

[Beedster]

Hope you’ve got a string winder 👍

 

Time to settle varies with strings and playing volume, Spiros not the worst for sure - that prize goes to guts - but give it a few days before you gig 

[Burns-bass]

The tension on a set of DB strings is much higher than electric bass strings. You need to ensure that the string end is secured under the string as it winds around the peg. This is vital as when you bring the string to tension the string can slip, which can be very frustrating indeed (also means you'll forever be out of tune!

 

You'll also need to work in order. Don't remove all four strings at the same time as the sound post can fall over (which isn't good!).

 

 

 

 

[Kevsy71]

+1 for the string winder - and I found this video from Upton Bass useful the last time I changed:

 

 

[Beer of the Bass]

One at a time is good for keeping the bridge and soundpost in place. Spirocores settle fast in terms of tuning stability, but they have quite strong new string brightness that mellows over the first week or two of playing.

[Burns-bass]

42 minutes ago, Beer of the Bass said:

One at a time is good for keeping the bridge and soundpost in place. Spirocores settle fast in terms of tuning stability, but they have quite strong new string brightness that mellows over the first week or two of playing.

 

This is really true. I found that the strings felt like they were coated in some way which took a while to break in.

[philparker]

I have a string winder that fits to an electric drill/screwdriver (cordless), which makes it much easier. Although I have a few power tools, the one I use is the least powerful, and when I get close to being in tune, I revert to hand turning the peg (it would be very easy to over-tighten and snap the string...very expensive!).

 

As above - one string at a time - you don't want the sound post to drop.

[NickA]

I bought a string winder.  It even connects to an electric drill.  Still an awful faff as the winder falls off the tuners too easily.  Two people ( one to hold bass one to operate winder) might help.

[Beer of the Bass]

I've never bothered with a string winder, but then my century-old beech wood hatpeg tuners (with crude shoogly brass gears) are uneven and creaky enough that I'd be quite uneasy about winding them faster.

[Jamess72]

4 hours ago, JPJ said:

I’m about to change the strings on my Boosey Hawkes excelsior for the first time in my ownership. I have a new set of light Spirocores sitting here ready to go on, and I’ve watched videos on YouTube from the likes of Geoff Chalmers on the ‘how to’ but before I dive in, I thought I’d ask the Basschat massive whether you have any cunning tips, do’s/don’ts etc?

 

Also, how long do new double bass strings take to stretch and settle? I have a gig on Sunday so I’ll hold off changing strings until after then, but it would be good to know the general rule of thumb on this.

A couple of tips: take your time when winding the strings to avoid too much tension too quickly, and make sure to stretch the strings gently once they’re on by pulling them with your hands. As for settling, new strings can take a few days to fully stretch, so it’s best to give them some time to settle in. If you can, tune them up a bit every couple of hours leading up to your gig.