Tech advise on wiring bass cab tweeter

[patrikmarky]

Long story short ..I have a epifani 2 x12 bass cab and all the speakers cooked ..I replaced the 2 no 12” speakers but never bothered re-wiring the tweeter ..I’ve since found a replacement but have forgotten how it’s wired 🤔…any advice would be greatly appreciated ..

[BassmanPaul]

My mind says that even though you burned the woofers the tweeter should have been protected by the crossover.

 

[patrikmarky]

I was wondering if the crossover is done ..

[BassmanPaul]

Why would it be? The crossover should have two wires coming from it that connect to the woofers. They should be the same colours as the wiring between the woofers.  If this is so in your case connecting these wires to the same colours on a woofer should bring the tweeter back on line.

 

Edited Saturday at 20:19 by BassmanPaul

[Phil Starr]

@BassmanPaul is almost certainly right. If you can identify the wires going in to the crossover then one is positive and one negative. Often positive is red and negative black. The crossover may be a complex affair with a separate circuit for the bass drivers and the horn but often is just a simple high pass filter that only affects the tweeter. Take some pics if you aren't sure and someone will advise how to connect everything.