Bypassing Preamp on Ashdown ABM 600

[Pirellithecat]

Probably an obvious answer to this, but I've tried and failed so far!  
I want to try my Laney Digbeth pre-amp pedal direct into the power amp stage of the Ashdown.    So the circuit would go Bass>Digbeth>Ashdown Power Stage.  I can get the Digbeth to work via the Send Return Loop, but this means the bass is plugged into the Ashdown and passes through the Ashdown Pre amp before it arrives at the Digbeth.  
Anyone know how to make this happen? 
Thanks

[paul_5]

plug your bass directly into the Laney, then go from the Laney to the RETURN of your Ashdown - that should bypass the Ashdown preamp entirely.

 

[Beedster]

16 minutes ago, paul_5 said:

plug your bass directly into the Laney, then go from the Laney to the RETURN of your Ashdown - that should bypass the Ashdown preamp entirely.

 

Yep 👍 

[MichaelDean]

You'll need to put a cable or something in the input of your ABM. Ashdown amps usually have a switching jack for the input that mutes the output. Something like a 3.5mm to 1/4” headphone adapter would do the job. 

 

Edited 3 hours ago by MichaelDean
Clarity