police squad Posted April 8 Posted April 8 Hi there people I'm about to wire up a P bass. The earth wire that goes to the bridge, what gauge should I use and do I tin the end with solder, or just leave it as is TY Quote
Aidan63 Posted April 8 Posted April 8 most companies use 22Awg I believe which is 0.34mm, or 20Awg which is 0.5mm and very commonly available one way to increase contact with the bridge is to fan the strands and then sandwich with copper foil to increase contact area and stop the wire being pushed into the finish/wood like is sometimes seen 1 Quote
police squad Posted April 8 Author Posted April 8 2 minutes ago, Aidan63 said: most companies use 22Awg I believe which is 0.34mm, or 20Awg which is 0.5mm and very commonly available one way to increase contact with the bridge is to fan the strands and then sandwich with copper foil to increase contact area and stop the wire being pushed into the finish/wood like is sometimes seen cool thank you Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.