Aclam Guitars pedal board

[WalMan]

I’ve been looking to rearrange my pedalboard for a while and wanted one that did not require Velcro on the bottom of pedals. I had looked at the Rockboard but ended up with this from Aclam.

 

Arrived pretty quickly from Spain and generally seems solid construction and ok.

 

Pedals are held on with the blocks that screw down to a track on the top. They are a bit fiddly to start with but I got used to them. The pedal side of the locks has a slight rubberised feel and holds the pedals down with pressure on either side. It remains to be seen whether/how quickly they might work loose, but a quick check every so often will hopefully keep that sorted.

 

Palmer 8 outlet power supply underneath. I should have ordered the tray instead of the legs to clamp that down as I realised that they are too long and required the front legs on the board to be extended as far as possible so that the power supply clamps were not touching the floor.

 

The MicroThumpinator is currently held underneath with cable ties whilst I sort out final bits for the power supply.

 

Picked up a set of EBS solderless cables to make up the links and will put in a final one from last in the chain to the Thumpinator once I have everything else settled. The cables from the power supply to pedals are more than long enough so wound underneath and currently held with Velcro cable ties.

 

All in all fairly pleased with the outcome.

[Quatschmacher]

I’ve been using these for a few years. Love them, though occasionally some pedals have power sockets in places which fall awkwardly within the tracks.