Jump to content
Why become a member? ×

Cab/Combo Cover in VGC


Recommended Posts

I think I bought this from Coverovercovers.co.uk (cost near £50) about 4 years ago for an Epifani 310UL. The Epi was sold sometime ago but held onto this thinking it would come in useful for other cabs but it never fitted anything I had since or now.
Internal dimensions are H24", W22", D17". Handle holes are near central on both sides, 5.5" square and start about 7" from top.
No holes or tears. Water resistant. The picture shows the cover freestanding, hence why its a little curved.
Looking for £25.00 posted.

Edited by whynot
Link to comment
Share on other sites

[quote name='CyberBass' post='511159' date='Jun 11 2009, 01:22 PM']Now if it had been 23" width I would have bought this for my ebs Neo 212 :-([/quote]
It may very well fit 23" wide as my measurements apart from height were conservative.
I'll measure it again later.

Link to comment
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
  • 2 months later...

[quote name='whynot' post='605058' date='Sep 21 2009, 09:59 PM']Never quite made it to Ebay.[/quote]
Please could you re-check the depth of 17".. Any chance it might be more like 18" because if so it would fit my Eden Metro and I'd be very interested?

Thanks!

Link to comment
Share on other sites

[quote name='silverfoxnik' post='606276' date='Sep 22 2009, 11:31 PM']Please could you re-check the depth of 17".. Any chance it might be more like 18" because if so it would fit my Eden Metro and I'd be very interested?

Thanks![/quote]
Will check tonight.

Link to comment
Share on other sites

Re-measured this evening and as mentioned before the cut is 22.5" width and 17" deep but the cover is flexible, not rigid, so is possible to fit something wider OR a little deeper but that would impact on the length of the remaining sides.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...