Rik (ESA) Posted June 17, 2009 Posted June 17, 2009 Afternoon Folks, I've got mainly rack gear, and as i don't fiddle with my settings on my pedals during a gig and only with my amp, i would like to install them into my 19 inch rack. Has anyone here done this before, and if so, what's the best way?! Cheers Rik Quote
EBS_freak Posted June 17, 2009 Posted June 17, 2009 [quote name='Rik (ESA)' post='516566' date='Jun 17 2009, 04:25 PM']Afternoon Folks, I've got mainly rack gear, and as i don't fiddle with my settings on my pedals during a gig and only with my amp, i would like to install them into my 19 inch rack. Has anyone here done this before, and if so, what's the best way?! Cheers Rik[/quote] Check out GCX Ground Control... Axxess electronics for starters... Quote
Thunderthumbs Posted June 17, 2009 Posted June 17, 2009 Yeah, I've seen it done before. It was done with rack rails (that are generally used in IT for servers, etc.). That way, if needed, you can slide out your pedal board to make any necessary adjustments. You'll find the appropriate stuff by googling it. Quote
EBS_freak Posted June 17, 2009 Posted June 17, 2009 Try this if you want to avoid MIDI [url="http://woboge.com/remote.html"]http://woboge.com/remote.html[/url] Quote
BOD2 Posted June 17, 2009 Posted June 17, 2009 Well you can buy 19 inch rack shelves, so you could velcro the pedals onto a shelf. There are also "sliding drawer" shelves that slide out which would allow you to easily access the pedals whenever you want - gets a bit expensive though. [url="http://www.penn-elcom.com/Default.asp?MC=1303000&GC=Group"]http://www.penn-elcom.com/Default.asp?MC=1...00&GC=Group[/url] Actually I'd be inclined to put a large cable tie around each pedal (drill suitably spaced holes in the shelf to allow a large cable tie to pass right around the pedal) and that will stop the pedals becoming dislodged if the rack gets knocked. Quote
EBS_freak Posted June 17, 2009 Posted June 17, 2009 Hang on - are we talking about physical installation into a rack? Or remote control? Rack shelf/rack drawer with velcro would secure the pedals (you probably need rear rack ears for the shelf option though... but it does give the ability to slide your pedals out of the rack...) If you are feeling particularly flush, give [url="http://www.skrydstrup.com"]http://www.skrydstrup.com[/url] a chance... Quote
Rik (ESA) Posted June 17, 2009 Author Posted June 17, 2009 Always been fascinated by midi, and still haven't a clue about it, so i'll check the link! However the original intention was to just set up my pedals in the effects loop of my amp, so they wouldn't need 'controlling' as it were. Thanks for all the suggestions though everyone, most helpful! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.