M Box 2 Digidesign with Logic Pro

[MuddBass]

Hi all,

Trying to get a Mbox2 to work with Logic Pro. I'm using a MacBok 10.5.7 OSX

Tried downloading what I thought was the correct drivers from the digidesign website, and I get the correct icon appear on my Mac.

However, when I click on this icon I get a box come up with the following message:

Digidesign HW: Unsupported device
Status: Not connected HW not found

Any ideas?

Thanks

Greg

[~tl]

Is this the driver you installed?

[url="http://www.digidesign.com/index.cfm?navid=3&langid=100&itemid=33009&categoryid=36"]http://www.digidesign.com/index.cfm?navid=...p;categoryid=36[/url]

Where does the icon "appear" on your Mac?

Edited July 15, 2009 by ~tl

[Archetype]

I would install ProTools as this will install the correct drivers along with the MBox tools.
You can also use both ProTools and Logic with the MBox and enjoy both worlds.

Plus if its ProTools 8 then you get a whole load of nice Virtual instraments

G

[MuddBass]

[quote name='~tl' post='541337' date='Jul 15 2009, 02:45 PM']Is this the driver you installed?

[url="http://www.digidesign.com/index.cfm?navid=3&langid=100&itemid=33009&categoryid=36"]http://www.digidesign.com/index.cfm?navid=...p;categoryid=36[/url]

Where does the icon "appear" on your Mac?[/quote]

Sorry chaps - appears to be working ok now. That was the link - so not sure why it wasn't working at first

[Archetype]

[quote name='five-string.co.uk' post='541375' date='Jul 15 2009, 03:43 PM']Sorry chaps - appears to be working ok now. That was the link - so not sure why it wasn't working at first[/quote]

Yea, thats digidesign for you, things get . but when it works it works well