Ashdown Tech Question

[Urban777]

Hey, I'm sorting out the gear I want to get and for a long time now I've been switching between rig ideas, but I've just thought of something else. Can you mix two MAG 810 cabs with an Ashdown 600H?

If anyone has any knowledge about this, or any advice than please comment :-)

[lateralus462]

[quote name='Urban777' post='580060' date='Aug 25 2009, 12:13 PM']Hey, I'm sorting out the gear I want to get and for a long time now I've been switching between rig ideas, but I've just thought of something else. Can you mix two MAG 810 cabs with an Ashdown 600H?

If anyone has any knowledge about this, or any advice than please comment :-)[/quote]

No - as far as I know the 600H will only take a 4ohm minimum load, and as the MAG 810 are 4 ohm each that would give a load of 2ohm and probably fry the head.

[phatbass787]

Yup the only Ashdown heads that you can run 2x 4 ohm 8x10s off are teh ABM 900 and Klystron 1000, both have 2 x powerstages so you can put 575 watts into each cab. Thinking about it a superfly or little giant 1000 should run 2 x 4 ohm 810's too!

[lateralus462]

I think an ABM 900 plus 2 810's is my ultimate rig.

[Mr. Foxen]

Ot you can rewire the 8x10s to 16 ohm fairly easily. If they are wired like my ABM 8x10, only need to take of the jack plate and swap some wires. Check with a meter though.

[simon1964]

[quote name='Urban777' post='580060' date='Aug 25 2009, 12:13 PM']Hey, I'm sorting out the gear I want to get and for a long time now I've been switching between rig ideas, but I've just thought of something else. Can you mix two MAG 810 cabs with an Ashdown 600H?

If anyone has any knowledge about this, or any advice than please comment :-)[/quote]

I've no idea, but Ashdown's tech department are the most helpful of any company I've dealt with. I'd drop them an email.