Jump to content
Why become a member? ×

Recommended Posts

Posted (edited)

[b][color="#FF0000"]Alesis Multimix 12 desk [/color][/b]- [b][size=4]£70 [/size][/b]

4 x XLR inputs, 8 x 1/4" inputs, on-board FX, phantom power (switchable), all channels with 3-band EQ ... what's not to like?
Condition is good, but cosmetically no longer flawless. Everything functions exactly as it should. Original manual & power supply.

[attachment=32494:Alesis_Multimix_12.jpg]

This can be had either from Chiswick (London W4) or from the West End (London WC1). If you'd like to test it first then you'll need to come to Chiswick.

I'm perfectly happy to post (at the buyer's expense).

Edited by Happy Jack
Posted

[quote name='cheddatom' post='593634' date='Sep 9 2009, 10:00 AM']are there direct outputs and/or insert points for the channels with mic-pres?[/quote]

CONTROL

Front-panel channels (top down):

4 mic/line channels with 75Hz highpass filter switch and mic/line gain.

All channels with 3-band EQ (high shelving at 12kHz, mid bandpass/reject at 2.5kHz, low shelving at 80Hz), aux send A (pre- or post-fader), aux send B (post-fader, onboard or external effects), pan or balance, pre-fader listen or solo-in-place, mute or alt 3/4, 60mm fader.

Front-panel other:

Effect section with selector plus clip and signal LEDs.

Aux return A level, effects/aux return B level.

Headphone/control room out level with mix, alt 3/4, 2-track, and alt 3/4 to mix switches.

Solo mode, 2-track to mix switches.

Stereo main and alt 3/4 60mm faders.

Stereo 8-segment LED meters.

Posted

[quote name='cheddatom' post='593763' date='Sep 9 2009, 12:21 PM']ta for the info, it's not for me sorry! Good luck with the sale.[/quote]
Bear in mind that the inserts on any desk can be turned into direct outs with a TRS jack with the tip and ring wires shorted together. It provides passthrough of the uninterrupted signal through the insert point, plus an unbalanced split output into a recording device or whatever.

Same function can be done using a patchbay.

Posted

Erm ... you lost me just after the word "desk".

You wouldn't believe how electrically illiterate I am.

Well, maybe you would.

Posted

[quote name='bennifer' post='594182' date='Sep 9 2009, 06:58 PM']Bear in mind that the inserts on any desk can be turned into direct outs with a TRS jack with the tip and ring wires shorted together. It provides passthrough of the uninterrupted signal through the insert point, plus an unbalanced split output into a recording device or whatever.

Same function can be done using a patchbay.[/quote]

yeh but I don't think this desk has inserts on each mic channel?

Posted

[quote name='cheddatom' post='599952' date='Sep 16 2009, 10:27 AM']yeh but I don't think this desk has inserts on each mic channel?[/quote]
This may be true, oops - well if it does have inserts on each channel, they can be used as direct outs... if not... then no :)

  • 3 weeks later...
  • 4 months later...
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...