sshorepunk Posted October 17, 2009 Share Posted October 17, 2009 (edited) Just took this out of my Sei It's a Bartolini 3 band pre on a Jazz plate It's not hard wired to anything so could easily be fitted into another bass without the plate The pot layout is as follows, Volume, blend, Mid, stacked bass and treble The volume pot is push/pull for the LED's on my sei and there are two coil selector switches. One for each pick up and 3 way for each coil and both together The grey cable you can see in the photo's is for the jack, the power cables are easily seen, pick ups connect to the switches, but these could be removed and p/ups wired direct to the pre, I'm not sure about the wiring on the switches, but I suspect the details are out there on the www In the photo's, the plate looks a bit crap, this is just off my fingers, it's in good looking order and the pre amp was working fine without any issues prior to be removed from the bass £50 posted ? Edited October 18, 2009 by sshorepunk Link to comment Share on other sites More sharing options...
sshorepunk Posted October 18, 2009 Author Share Posted October 18, 2009 [quote name='Bassilla' post='629307' date='Oct 18 2009, 10:42 AM']Is there room for a battery in there as well?thanks.[/quote] This came out of a bass with a seperate battery box, I doubt there would be room inside a standard sized cavity T Link to comment Share on other sites More sharing options...
sshorepunk Posted October 18, 2009 Author Share Posted October 18, 2009 SOLD Link to comment Share on other sites More sharing options...
Recommended Posts