wayneyboy Posted October 21, 2009 Share Posted October 21, 2009 Hi- i have a td650 and currently use a proline 4x10- looking to get another smaller cab to save humping the 4x10 around for small gigs- the 4x10 is 4ohm- the markbass cab i have been looking at is an 8ohm- i assume this will be ok to use with the head- as this is an 8ohm how does this effect the output- i.e will the amp have to be driven more to power the cab? Bit useless with this! also i assume if i get another cab it will need to be 8ohm as well so the same? advice much appreciated! thanks Quote Link to comment Share on other sites More sharing options...
lee650 Posted October 30, 2009 Share Posted October 30, 2009 (edited) Hi there I used to have a TD650 (downgraded now to the 350) and i used to use it with one 8ohm accugroove cab for smaller gigs and 2 of them for larger, with no issues!, im sure i read that at 8 ohms the 650 puts out about 260 watts (im sure someone will correct me if im wrong) so make sure the 8 ohm cab can handle that, i wouldnt mix 1 x8 and 1x4ohms though, but you could run 2x8ohms and 1x4 ohms or 4x 8ohms speakers as the 650 goes down to 2 ohms, 2x 8ohms would give you 450 watts of power hope this helps mate Edited October 30, 2009 by lee650 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.