7enderhead Posted October 21, 2009 Share Posted October 21, 2009 (edited) Good evening Ladies and Gentlemen, Short version: Will swap Geddy Lee Jazz Body for Precision Body. Long version: What I have is this: [attachment=34918:Geddy_02.jpg] A Fender Geddy Lee Signature Jazz bass, MIJ, bought new in 2005. It is in good overall condition, apart from a few minor things which I will discuss shortly (its finish condition is so good that you can even see my greasy finger markings on the photo ). This is a great bass, with the little issue that it's a [i]Jazz[/i] bass, which means it has one pickup too many for me to get along with I will, however, not let go of the formidable neck. Therefore I seek to trade the body for a Precision bass body. First, what am I searching for? A Fender Precision body, preferably MIJ (since this is supposed to be a straight swap), but if you decide that you want the body so badly, I will also gladly consider an American P body. The preferred body colour I'm after is black, closely followed by, ha!, white, and sunburst. Surely, any other colour will be considered too. Preferred pickguard colours are white for a black body, white for a black body, or tortoise, black or white (not wait, scrap that ) for sunburst. Here are the small issues I mentioned earlier: [attachment=34921:Geddy_03.jpg] I have adjusted the Badass bridge so that the string spacing is even now. I wonder why they couldn't get that right the first time. The impact is only cosmetically, and some people prefer even string spacing. [attachment=34919:Geddy_05.jpg] Small ding can be seen in the picture. The hidden part: I changed the volume/volume/tone configuration to master volume/pickup selector switch (single pus, both parallel, both in series)/tone. If wanted, I could put it back into the original configuration. [attachment=34920:Geddy_06.jpg] Some very small scratches from changing strings. Without photo: A pickup cover was installed over the neck pickup (will be included too). The original white pickguard is included, too. I would want the P body to be fully loaded (bridge, pu, controls, pickguard; I don't care about strap holders). I'm located in continental Europe (Austria, that is), but I guess shipping a body only is much less of a hassle then hauling around a full-size bass. Cheers, Christian Edited October 22, 2009 by 7enderhead Link to comment Share on other sites More sharing options...
Recommended Posts