Beater JBass project NOW SOLD

[BassBod]

Amazing what you find under the stairs. This is a bitser/beater, full details below, but made up of good parts with a "proper" rattle can nitro crap-home -sprayed-finish (I won't be trying that again). No Pickups or electrics are fitted or included, but the routes are all standard Jbass sizes so it will be easy to fit any fender spec replacement type parts.

[attachment=42496:P1000083.JPG][attachment=42497:P1000084.JPG][attachment=42498:P1000089.JPG]


Body - solid alder, medium weight, came from Brandoni several years ago. Has a fiesta red/white primer nitro finish, but well bashed about. All bashing is superficial except one chip down by the control cavity (which is why it then got bashed about!) Not sanded and polished to perfection. At all.

Neck - from WD, Pbass neck with rosewood board, with a tinted satin nitro finish on headstock face, the rest is oiled (gunstock as used by Musicman). Has a decal and Schaller tuners.

[attachment=42499:P1000090.JPG][attachment=42500:P1000095.JPG]

Will come in a cheap but ok gig bag (Brandoni)

This could be the perfect pub gig bass....yours for £120 collected from Bristol/Bath area. PM any questions or insults...I'm out a bit for the next few days, but will get back asap.

BB

Edited February 13, 2010 by BassBod

[nick]

PM'd

[BassBod]

Now SOLD...to the man round the corner!

BB