XLR to 1/4" jack cable

[oldmanrock]

Hi all, hope this is in the right place. Did a search but didn't come up with anything. Apologies if I missed it.

I'm using a preamp and a power amp, housed in a rack case, and I'm considering placing an EQ between them. However the EQ only has balanced XLR ins and outs, no jacks.

I can use an XLR cable to connect the EQ to the power amp but I'll need an XLR to jack cable to connect the preamp to the EQ.

So should I use a balanced or unbalanced one - or doesn't it matter? Cheers in advance.

[Bankai]

For this application it shouldn't matter. I think you should be able to use either.

[oldmanrock]

Cheers. I can't see it making a difference but you never know!

[mrcrow]

[url="http://www.dplay.com/dv/balance/balance.html#cross"]i am not sure but this link may help[/url]

[oldmanrock]

[quote name='mrcrow' post='787364' date='Mar 26 2010, 07:34 PM'][url="http://www.dplay.com/dv/balance/balance.html#cross"]i am not sure but this link may help[/url][/quote]
Thanks, that give me a better insight. As all this stuff is unbalanced and I really just need an XLR connector one end I think unbalanced will suffice.