Warwick pushpull pot

[Peaty]

Hi bass chatters

Can any tell me what is the impedance values of the push pull pot used in the steamer 1 (part no M84500) I am guessing 500k ohm based on the part no. but if anyone knows for certain please let me know, also is this likely to be log or linear taper.

Does any one have any recommendations as to where would be the best place to get one in the UK.

thanks Pete

[warwickhunt]

[quote name='Peaty' post='87211' date='Nov 12 2007, 11:03 AM']Hi bass chatters

Can any tell me what is the impedance values of the push pull pot used in the steamer 1 (part no M84500) I am guessing 500k ohm based on the part no. but if anyone knows for certain please let me know, also is this likely to be log or linear taper.

Does any one have any recommendations as to where would be the best place to get one in the UK.

thanks Pete[/quote]

Try Warwick.de they have virtually all the spares you could need and of the appropriate values.

[largo]

I think the Bass Centre, www.basscentre.co.uk are the UK supplier of all Warwick parts & components. They'll get one for you :0)

[BB2000]

It's 500K linear with a DPDT switch. If you've difficulty sourcing one give me a shout.

[quote name='Peaty' post='87211' date='Nov 12 2007, 11:03 AM']Hi bass chatters

Can any tell me what is the impedance values of the push pull pot used in the steamer 1 (part no M84500) I am guessing 500k ohm based on the part no. but if anyone knows for certain please let me know, also is this likely to be log or linear taper.

Does any one have any recommendations as to where would be the best place to get one in the UK.

thanks Pete[/quote]

[Peaty]

Thanks BB2000 your a star.
I will try to order one up if that fails I will be in touch.

Cheers
Pete