12" neo wedge?

[Ba55me15ter]

Does anybody make what I want?

All my gigs are PA-supported, so all I need is a monitor. I'm a great believer in having a cab on the floor close to you actually pointing at your head, as opposed to a conventional cab blowing air past your ankles / arse. I also like relatively uncoloured cabs which give me a reasonable reflection of what's going out FOH.

At the moment I'm using a JBL Eon 15 PA cab powered by a Mark Bass SA450, and this actually does a very good job. However, it would be nice to have something a little more compact and perhaps a bit lighter.

Does anybody know of a full-range 12" neo cab in wedge format?

[lozbass]

You could try an EBS neo - the cabinet has a 'sprung lever' to enable tilt back - take a look at:
[url="http://www.ebs.bass.se/2007/neo112.htm"][url="http://www.ebs.bass.se/2007/neo112.htm"]http://www.ebs.bass.se/2007/neo112.htm[/url][/url]

I use an Epifani ul112 for monitoring (I find it to be an excellent cabinet) - I prefer to have it raised (to around waist height) rather than wedge something under it to facilitate tilt.

Edited November 13, 2007 by lozbass

[Dragonlord]

Well, FWIW Glockenklang makes a 210 neo wedge that weighs 33 lbs (15 kg).

[Dragonlord]

BTW, can't you find someone who will build you what you want? It's a small cab, so maybe even Low Down Sound in the US could make you and ship you one, the shipping costs shouldn't be that much.

[Buzz]

How aboots:
[url="http://billfitzmaurice.com/W10.html"]http://billfitzmaurice.com/W10.html[/url]

[Ba55me15ter]

Cheers Buzz - that looks very interesting!

[quote name='Buzz' post='87947' date='Nov 13 2007, 04:46 PM']How aboots:
[url="http://billfitzmaurice.com/W10.html"]http://billfitzmaurice.com/W10.html[/url][/quote]

[Telebass]

When wanting an ext cab for my CMD121H MArkbass combo, I ordered up the same B&C driver that was in the combo, then fitted it (not without some difficulty...) into the empty shell of a Behringer BX1200 bass combo. It does just fine, and weighs 20lbs tops.