discreet Posted May 4, 2010 Share Posted May 4, 2010 Sorry if this has been covered previously, but I need to replace old perished foam under my 76 P-bass pickups. I know you can buy foam specifically for the purpose: [url="https://www.kleinpickups.com/p-223-p-bass-pickup-foam.aspx"]P-Bass Pickup Foam[/url] But what I want to know is, can you use any old foam, or what? Or can you use something else; springs, rubber, etc? Are there 'originality' issues? What are you guys using? Thanks! Quote Link to comment Share on other sites More sharing options...
Ancient Mariner Posted May 5, 2010 Share Posted May 5, 2010 Some foams will last longer than others. Personally I'd try medical grade silicon rubber tubing if you can get it: either in small diameter around the PU retaining screws or a fat piece under the middle of the PU. It should offer the high damping efficiency of foam together with a very long lifespan. 1 Quote Link to comment Share on other sites More sharing options...
geoffbyrne Posted May 5, 2010 Share Posted May 5, 2010 Many get good mileage from cutting up old-ish mouse mats. You can put a double layer in too if you need a bit of height. G. 2 Quote Link to comment Share on other sites More sharing options...
stevie Posted May 5, 2010 Share Posted May 5, 2010 [quote name='geoffbyrne' post='828931' date='May 5 2010, 08:30 PM']Many get good mileage from cutting up old-ish mouse mats. You can put a double layer in too if you need a bit of height.[/quote] Works really well. 1 Quote Link to comment Share on other sites More sharing options...
Al Heeley Posted May 5, 2010 Share Posted May 5, 2010 add to that old karrimat bits from camping trips, pretty durable and the right amount of elasticity/resiliance. 1 Quote Link to comment Share on other sites More sharing options...
discreet Posted May 6, 2010 Author Share Posted May 6, 2010 Thanks for the advice guys, looks like a mouse mat would be the cheapest and easiest option. Plus, one mouse mat would last a lifetime - at least - IMO Quote Link to comment Share on other sites More sharing options...
Jean-Luc Pickguard Posted May 6, 2010 Share Posted May 6, 2010 [quote name='discreet' post='829490' date='May 6 2010, 12:12 PM']Thanks for the advice guys, looks like a mouse mat would be the cheapest and easiest option. Plus, one mouse mat would last a lifetime - at least - IMO [/quote] +1 to mousemat I used a doubled-up pieces of mouse mat in my fretless build - works well. 1 Quote Link to comment Share on other sites More sharing options...
bassmachine2112 Posted May 8, 2010 Share Posted May 8, 2010 hi,get some springs out of biro pens and mount them on the screws,get ones the same length,work a treat Quote Link to comment Share on other sites More sharing options...
7string Posted May 9, 2010 Share Posted May 9, 2010 (edited) If you've got the foam right then you don't need the springs. The foam should spring back as you loosen the screw. I had the same problem when I set up [b]Geo-bass[/b]'s Aerodyne. Here you can see the compressed foam under the pickups and the new, lighter foam which went underneath. I'd repaired a Dano guitar who's pickups weren't adjustable at all and kept the extra foam handy. Just look for foam with a good bounce to it. If it's too heavy it compresses over time and that's what'd happened in this case. I just went along the cleaning products aisle in Tesco and picked out some sponges which looked liked they'd work. Edited May 9, 2010 by 7string Quote Link to comment Share on other sites More sharing options...
Musicman69 Posted May 9, 2010 Share Posted May 9, 2010 Biro springs.. quick and easy solution, works perfectly. Quote Link to comment Share on other sites More sharing options...
Wombat Posted December 1, 2023 Share Posted December 1, 2023 Hola! I appreciate that this thread could still be correct, but it’s also quite old - like the P bass I just inherited (a 78/9 but from someone who doesn’t play, not passed)! I’ve not taken it to bits yet but it’s exhibiting the same ‘symptoms’ - the pickups can be lifted when the screws are raised but they don’t stay up. The bass has been stored in a wardrobe for like 20 years so I’m guessing the foam has perished (if it was fitted with foam?). As this is now (arguably) a vintage bass I’d like to sort it in a sympathetic way so…. …..is there a way to fix this that wasn’t around in 2010 or do I just do what’s suggested above? Any help gratefully received. Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted December 1, 2023 Share Posted December 1, 2023 21 minutes ago, Wombat said: As this is now (arguably) a vintage bass I’d like to sort it in a sympathetic way so…. …..is there a way to fix this that wasn’t around in 2010 or do I just do what’s suggested above? A 78 would have foam under the pickups which has possibly started to perish or has hardened over time, I’d just replace the foam , there’s quite a few places that stock it, good luck 1 1 Quote Link to comment Share on other sites More sharing options...
Dan Dare Posted December 1, 2023 Share Posted December 1, 2023 Get a cheap thin foam camping mattress and cut a bit from it. Will cost you around a fiver. The foam is dense and closed cell, so it compresses, but doesn't squash flat. One mattress will give you enough to do hundreds of basses. 1 1 Quote Link to comment Share on other sites More sharing options...
Geek99 Posted December 1, 2023 Share Posted December 1, 2023 2 hours ago, Wombat said: Hola! I appreciate that this thread could still be correct, but it’s also quite old - like the P bass I just inherited (a 78/9 but from someone who doesn’t play, not passed)! I’ve not taken it to bits yet but it’s exhibiting the same ‘symptoms’ - the pickups can be lifted when the screws are raised but they don’t stay up. The bass has been stored in a wardrobe for like 20 years so I’m guessing the foam has perished (if it was fitted with foam?). As this is now (arguably) a vintage bass I’d like to sort it in a sympathetic way so…. …..is there a way to fix this that wasn’t around in 2010 or do I just do what’s suggested above? Any help gratefully received. I don’t think mousemat foam is hugely different from what went before. 1 1 Quote Link to comment Share on other sites More sharing options...
Paul S Posted December 1, 2023 Share Posted December 1, 2023 I've used foam pipe lagging sleeves before now, cheap as cheaps - especially if you happen to have a bit lying around. Not as dense but still works a treat. 1 Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted December 1, 2023 Share Posted December 1, 2023 Stewmac do a few types and they are pretty cheap, 1 Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted December 1, 2023 Share Posted December 1, 2023 I likes these with the spring to help hold the pickup in the cover with a little more tension. https://a.aliexpress.com/_mM5BktA 2 1 Quote Link to comment Share on other sites More sharing options...
shoulderpet Posted December 4, 2023 Share Posted December 4, 2023 I have (more times that I like to admit) often just cut up an unused washing up sponge and used that, proper foam is obviously 100 times better but it does the trick in an emergency 1 Quote Link to comment Share on other sites More sharing options...
ossyrocks Posted December 28, 2023 Share Posted December 28, 2023 Alegree pickups do some good ones, I’ve got them in a couple of basses. https://www.alegree.co.uk/products/precision-bass-height-foam Rob Quote Link to comment Share on other sites More sharing options...
Baloney Balderdash Posted December 29, 2023 Share Posted December 29, 2023 (edited) If you at some point bought any EMG pickups and still have the packaging they came with the foam inside, cut to size, works absolutely perfect as pickup foam. Edited December 29, 2023 by Baloney Balderdash 2 Quote Link to comment Share on other sites More sharing options...
thebrig Posted March 6 Share Posted March 6 On 28/12/2023 at 21:26, ossyrocks said: Alegree pickups do some good ones, I’ve got them in a couple of basses. https://www.alegree.co.uk/products/precision-bass-height-foam Rob I use these in all my P basses, the embedded springs in the form means that they never ever sag, they are by far the best I've used, and for £4 for two, well worth the money. 3 Quote Link to comment Share on other sites More sharing options...
lidl e Posted March 6 Share Posted March 6 On 29/12/2023 at 10:49, Baloney Balderdash said: If you at some point bought any EMG pickups and still have the packaging they came with the foam inside, cut to size, works absolutely perfect as pickup foam. Fender also. As well as lollar. Quote Link to comment Share on other sites More sharing options...
soulstar89 Posted April 2 Share Posted April 2 On 06/03/2024 at 13:02, thebrig said: I use these in all my P basses, the embedded springs in the form means that they never ever sag, they are by far the best I've used, and for £4 for two, well worth the money. I need to get some foam for my p bass. Dies one strip fit the length of each pickup? Quote Link to comment Share on other sites More sharing options...
ossyrocks Posted April 3 Share Posted April 3 8 hours ago, soulstar89 said: I need to get some foam for my p bass. Dies one strip fit the length of each pickup? The one in the link below will do both pickups, it's two pieces of foam with a spring in each. https://www.alegree.co.uk/products/precision-bass-height-foam 2 Quote Link to comment Share on other sites More sharing options...
soulstar89 Posted April 3 Share Posted April 3 41 minutes ago, ossyrocks said: The one in the link below will do both pickups, it's two pieces of foam with a spring in each. https://www.alegree.co.uk/products/precision-bass-height-foam Cheers bud. Gonna order now Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.