Marvin Posted May 6, 2010 Share Posted May 6, 2010 (edited) I posted a thread about tone several months ago. In it several posts referred to the mids in getting their tone, specifically cetera. Since Christmas I've been playing through a zoom pedal and got a little sidetracked, however this afternoon I was twiddling with my practice amp and remembered what cetera said about inverting the usual U shaped eq that many of us go for. And.......oh yes, push up those mids, turn down the bass and treble (but not too much) and what a difference. Literally a tone I've been looking for. Two problems though. The zoom pedal is not needed (although I suppose I could try and get the same result through it) and the amp I was using is only a 35w practice job so not really suited to anywhere outside the living room . I just wanted to share that. Don't forget those mids. Edited May 6, 2010 by Marvin Quote Link to comment Share on other sites More sharing options...
gary mac Posted May 6, 2010 Share Posted May 6, 2010 Yes remember when I discovered that on my trace. Suddenly had the sound I wanted when gigging. Still miss my trace rig, but not the weight. Quote Link to comment Share on other sites More sharing options...
wateroftyne Posted May 6, 2010 Share Posted May 6, 2010 (edited) It's all in the mids. In fact, here's a c&p from the Oxford English dictionary: [size=5][font="Book Antiqua"][b]mids[/b] ('midz') a. [i][b]noun[/b][/i] The bit where the tone lives, innit.[/font][/size] Edited May 6, 2010 by wateroftyne Quote Link to comment Share on other sites More sharing options...
Doddy Posted May 6, 2010 Share Posted May 6, 2010 I've always had a slight mid boost in my EQ. I tried it years ago after reading a thing on Will Lee's tone,and loved the sound I was getting. I've done it ever since Quote Link to comment Share on other sites More sharing options...
GreeneKing Posted May 6, 2010 Share Posted May 6, 2010 Preaching to the converted here Quote Link to comment Share on other sites More sharing options...
Higgie Posted May 6, 2010 Share Posted May 6, 2010 I always found I could hear myself better by bumping the mids a little bit. Scooping the EQ just results in a woofy clanky mess I find (obviously depending on how much!). I usually boost the bass and treble, then add just a touch more mids, so your still boosting everything for a bit more oomph, but just the mids a tad more to cut through! Quote Link to comment Share on other sites More sharing options...
Buzz Posted May 6, 2010 Share Posted May 6, 2010 I feel like I've stumbled into a thread on BW, circa 2006. Quote Link to comment Share on other sites More sharing options...
OldGit Posted May 6, 2010 Share Posted May 6, 2010 (edited) [quote name='GreeneKing' post='829870' date='May 6 2010, 05:59 PM']Preaching to the converted here [/quote] +1 Once, many years ago after a particularly terribly sounding gig for me the sound man approached and gave me a lesson on how to twiddle the knobs. His first point was "don't unless you really need to". Then "cut, don't boost". We then discussed the bass sounds I admired and he recommend some eq settings that would help me achieve what I wanted. Out with the standard MarkieKing / Tracy Elliot smiley face thing, (and the Ashdown rig, actually), then set everything flat but down a tad from the notch except for the upper mids. That did the job. Edited May 6, 2010 by OldGit Quote Link to comment Share on other sites More sharing options...
Rosh Posted May 6, 2010 Share Posted May 6, 2010 I'm gonna have to evaluate my EQ if there's this much positive review occuring! on my Warwick head I have: (amongst others) Lo, Lo Mid, Hi Mid, Hi Gonna have a twiddle at practice, the only thing is we have a synth and reed organ which is very mid-dy, which means I need to be lower to get heard! Mind you, I do turn the volume down on the bridge pickup so I just get that lovely P-like sound! Quote Link to comment Share on other sites More sharing options...
Pete Academy Posted May 6, 2010 Share Posted May 6, 2010 I've always boosted my mids to the max. It's the way to cut throught the mix. I know someone who sets his graphic EQ in a smile with mids totally cut. No definition whatsoever. If you want to hear the notes, the mids are essential. Quote Link to comment Share on other sites More sharing options...
OldGit Posted May 6, 2010 Share Posted May 6, 2010 [quote name='Pete Academy' post='829911' date='May 6 2010, 06:50 PM']I've always boosted my mids to the max. It's the way to cut throught the mix. I know someone who sets his graphic EQ in a smile with mids totally cut. No definition whatsoever. If you want to hear the notes, the mids are essential.[/quote] Well I blame Mark King and Trace Elliot for that. Quote Link to comment Share on other sites More sharing options...
NJE Posted May 6, 2010 Share Posted May 6, 2010 Converted to mid boosting years ago, it is the only way to be heard in a band mix. Years ago I used to have a 2 band Stingray and I boosted the bass and treble and then had a 'smiley' EQ on my trace......what was I thinking. Quote Link to comment Share on other sites More sharing options...
Conan Posted May 6, 2010 Share Posted May 6, 2010 (edited) [quote name='Higgie' post='829874' date='May 6 2010, 06:03 PM']Scooping the EQ just results in a woofy clanky mess...[/quote] Yup. Guilty of that one for many years! It's funny how this obvious insight comes to us in our later years... I always wondered how JJB was so audible in the mix - whether live or recorded. Bloody mid-scoop. Who needs it?! Edited May 6, 2010 by Conan Quote Link to comment Share on other sites More sharing options...
Marvin Posted May 6, 2010 Author Share Posted May 6, 2010 [quote name='Buzz' post='829887' date='May 6 2010, 06:18 PM']I feel like I've stumbled into a thread on BW, circa 2006.[/quote] I've gone green and started recycling. Quote Link to comment Share on other sites More sharing options...
Marvin Posted May 6, 2010 Author Share Posted May 6, 2010 [quote name='Conan' post='829964' date='May 6 2010, 07:41 PM']Yup. Guilty of that one for many years! It's funny how this obvious insight comes to us in our later years... I always wondered how JJB was so audible in the mix - whether live or recorded. Bloody mid-scoop. Who needs it?! [/quote] I've a feature on my practice amp that scoops the mids. It makes me sound a million miles away. Quote Link to comment Share on other sites More sharing options...
MuseMatt Posted May 6, 2010 Share Posted May 6, 2010 The only way to get through the noise in rehearsals and actually hear instead of feel what I was playing: mids. I love it! I think I tried that one after reading about the sadface smiley here somewhat over a year ago and never got back from it! Quote Link to comment Share on other sites More sharing options...
Wil Posted May 6, 2010 Share Posted May 6, 2010 Gotta love that low mid thump. It's a bit of an art dialling it in on a head that's based on a Sansamp, though! Quote Link to comment Share on other sites More sharing options...
wateroftyne Posted May 6, 2010 Share Posted May 6, 2010 [quote name='Wil' post='830022' date='May 6 2010, 08:44 PM']Gotta love that low mid thump. It's a bit of an art dialling it in on a head that's based on a Sansamp, though![/quote] I can imagine... that's why I sold mine! Quote Link to comment Share on other sites More sharing options...
Wil Posted May 6, 2010 Share Posted May 6, 2010 I seem to be able to do it by cutting the bass and treble on the head and jacking the master volume up. There is of course a second channel with a parametric mid but I can never get my head around getting the best sound from it. Quote Link to comment Share on other sites More sharing options...
Mr Fudge Posted May 6, 2010 Share Posted May 6, 2010 I have my markbass SA450 flat. You can hear everything. Might give the mids a whirl though as ther are the extra ones? I wonder what they would do? Quote Link to comment Share on other sites More sharing options...
essexbasscat Posted May 6, 2010 Share Posted May 6, 2010 Just checked this to be sure. The Markbass Sa450 owners manual gives guidance on the characteristics and use of frequencies of the low, low - mid, upper mid etc Helped my understanding by more than a tad !! T Quote Link to comment Share on other sites More sharing options...
Mr Fudge Posted May 6, 2010 Share Posted May 6, 2010 [quote name='essexbasscat' post='830068' date='May 6 2010, 09:37 PM']Just checked this to be sure. The Markbass Sa450 owners manual gives guidance on the characteristics and use of frequencies of the low, low - mid, upper mid etc Helped my understanding by more than a tad !! T[/quote] Yes will have to dig it out and a general mess about. Always pleased with this amp though, a real Rolls Royce of an amp. Quote Link to comment Share on other sites More sharing options...
rohan Posted May 6, 2010 Share Posted May 6, 2010 I always used to go for a huge mid scoop, as tone wise on it's own it sounds pretty punchy, but in the context of a mix, sounds awful. Quote Link to comment Share on other sites More sharing options...
nick Posted May 6, 2010 Share Posted May 6, 2010 (edited) I go for all controls flat on my TE V-Type (at 12'oclock) - perfect for me. If I really need to cut through, there's a push-pull upper-mids boost on the mid control - Like a kick in the chest! Edited May 6, 2010 by nick Quote Link to comment Share on other sites More sharing options...
51m0n Posted May 6, 2010 Share Posted May 6, 2010 sa450 eq is uber powerful, but the ae410 has that bit of agression inherently built in. Last gig I actually scooped that out a smidge, and boosted down in the lo mids. Set the compressor with a smidge of sub 40Hz Bass Expansion (love the Compounder for that - its not like eq, quite, very cool). Sounded awesome, just massive, kept up with a 4Kw rig, drums (miked), electric kit (two drummers you see), guitar and vox. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.