Jump to content
Why become a member? ×

Samson Wireless Concert IV


Recommended Posts

Bought this recently but have no current use for it, It is not "AS NEW" as described in the original ad, Its is oldish and looks used with the battery cover for the transmitter unit missing. I am happy to let this go for what i paid, which was fair for the unit £45 collected or plus postage?

Cheers

Dave


Concert IV is the best possible choice for those who want absolutely professional wireless without going over budget. Designed to break the price/performance barrier for sophisticated VHF systems, Concert IV uses the highest quality components throughout. It takes RF performance to a new level for fail-safe reception while providing transparent audio, quiet performance, rugged construction, and comprehensive features. Everything you need to get the job done right — and more.
System Includes: CR4 Receiver and CT4G Guitar Belt-pack Transmitter with Permanently Attached ¹ in. Cable.


Concert IV Wireless Instrument System Specifications

System Includes: CR4 Receiver and CT4G Guitar Belt-pack Transmitter with Permanently Attached ¹ in. Cable.
Transmitter (CT4L, CT4G, and HT4)
Transmission Mode: Frequency modulation, 80KF3E, 20 kHz peak deviation
Frequency Range: 173.60 MHz to 216.20 MHz, 5 frequencies
OSC System: Crystal controlled, x9 multiplication
RF Power: 20 mW
Operating Range: 300 ft.
Frequency Stability: ± 10 ppm
Approvals: Complies with ETS 300 422 and FCC Part 74
Radiating Harmonic and Spurious Emission: Below limits of applicable regulations
Antenna Type: Integral with input cable (CT4L, CT4G), Internal (HT4)
Audio Frequency Response: 40 Hz to 16 kHz ±3 dB (when used with the CR4 receiver)
Pre-Emphasis: 50 µSec
Noise Reduction System: NE571 based compandor
Signal-to-Noise Ratio: > 100 dB (when used with CR4 receiver)
Maximum Input Level: 0 dBV (CT4L, CT4G), -20 dBV (HT4)
T.H.D.: < 1% @ 1 kHz
Current Consumption: 22 mA
Battery Life (MN1604 9-volt alkaline): 18 - 20 hours
Operating Temperature: -10 to +55 degrees C
Controls: CT4L/CT4G Power On/Off, Mute On/Off, Level Control (Trimpot); HT4 Power On/Off, Audio On/Off, Level Control (Trimpot)
LED Indicator: Battery low
Dimensions (W x H x D):
CT4L/CT4G 65: 2.6 x 0.87 x 0.4 in.
HT4 37: 1.46 x 6.8 in.
Weight: 90 g (3.2 oz.)
Receiver(CR4 and CRND):
Receiving System: CR4: Single conversion Superheterodyne, Microprocessor True Diversity*; CRND: Single conversion Superheterodyne, Non-Diversity
Frequency Range: 169.0 MHz to 220.0 MHz
Receiving Mode: 80KF3E
Sensitivity: < 3 µV for 20 dB SINAD, < 10 µV for 50 dB S/N
Selectivity: 120 kHz BW, nominal @ -6 dB, ± 300 kHz (adj CH), -75 dB
Squelch Sensitivity: 2.5 µV to 250 µV adjustable
IF: 10.7 MHz
Local Oscillator System: Crystal controlled
Noise Reduction System: NE571 based compandor
De-emphasis: 50 µsec.
Signal to Noise Ratio: > 100 dB (IHF-A) line out, > 90 dB (IHF-A), mic out
Audio Frequency Response: 40 Hz to 16 kHz ±3 dB (when used with the CT4L, CT4G, HT4)
T.H.D.: < 1% @ 1 kHz
Audio Output Levels: 0 dBV unbalanced (1/4" phone connector), -20 dBV balanced (XLR connector)
Audio Output Impedance: 5 kOhms unbalanced, 600 Ohms balanced
Antennas: SO-239 connectors, front or rear, two 1/4" whip supplied
Operating Temperature: -10 to +55 degrees C
Controls: Volume, Squelch, Power (CR4 only)
LED Indicators: CR4: TX On/Antenna A or B (2 LEDs), Modulation Level (5 LEDs); CRND: TX On/Peak/Power (3 LEDs)
Power Requirement: 12 Volts DC, 250 mA, AC adapter supplied
Dimensions — without antennas (W x H x D):
CR4: 482 x 44 x 130 mm (19 x 1.75 x 5.125 in.)
CRND 178 x 44 x 108 mm (7 x 1.75 x 4.25 in.)
Weight (including antennas):
CR4: 1.4 kg (3.1 lbs.)
CRND: 0.5 kg (1.1 lbs.)

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...