Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Ashdown ABM C210T 500 EVO 3


sussexbassman
 Share

Recommended Posts

Just bought this combo so have had little chance yet to really try it out, but thought I'd post a couple things about it.

When I first tried it out the range of tone was immediately impressive, but as I wound up the volume I started to get a vibration/rattling noise from the top of the cab. I found that sliding a few sheets of paper between the top of the amp chassis and the cab top stopped the vibration. So I emailed Ashdown support and within 15 miniutes had a reply saying that it sounds like the rubber buffer strips have not been fitted (these units are made in China now), so Guy sent me a couple of reels of the stuff and I fitted it - job done!

This tells me two things -

1. the assembly is a bit hit and miss
2. the service and support by Ashdown,UK is supurb

Whilst fitting the strips I had a look inside the box and the quality of components looks excellent.

I'll report back when I've given the combo a few road tests ......

Link to comment
Share on other sites

  • 2 weeks later...

[quote name='sussexbassman' post='852169' date='May 30 2010, 09:58 PM']Just bought this combo so have had little chance yet to really try it out, but thought I'd post a couple things about it.

When I first tried it out the range of tone was immediately impressive, but as I wound up the volume I started to get a vibration/rattling noise from the top of the cab. I found that sliding a few sheets of paper between the top of the amp chassis and the cab top stopped the vibration. So I emailed Ashdown support and within 15 miniutes had a reply saying that it sounds like the rubber buffer strips have not been fitted (these units are made in China now), so Guy sent me a couple of reels of the stuff and I fitted it - job done!

This tells me two things -

1. the assembly is a bit hit and miss
2. the service and support by Ashdown,UK is supurb

Whilst fitting the strips I had a look inside the box and the quality of components looks excellent.

I'll report back when I've given the combo a few road tests ......[/quote]

MB1. :)
Gather You either like this?.... or it now resembles Alan Partridges Trouser Press?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...