Hartke 3500

[Pow_22]

Ive stumbled across one of these in a local junk shop. Seems to be in good working order etc but my question is this (im sh*t at backline stuff!). My current rig is a MAG300 head into a MAG410 and MAG115. Im assuming i wont have a problem just swapping the MAG300 for the Hartke, mainly im thinking Ohm wise (i dont get ohms at all!). Cheers bass peeps

[Merton]

Short answer: It'll be fine

Long answer: THe Harkte and Ashdown heads both work with a min load of 4 ohms. Both your cabs are 8 ohms, so wired in parallel (which they will be) will give you the 4 ohm minimum.