DanOwens Posted November 30, 2007 Share Posted November 30, 2007 Hey Guys, My mate has an Ashown MAG 300 2x10 and the right speaker had started to fart and clip a little. It was moving much more radically than the left speaker, so we took it out to have a look. All was well except one of the copper braided wires that led between the spade connectors and into the cone had snapped. We didn't know what the wires did, so we tried to repair it with a bit of solder and insulation tape. We put it back together and all was well until we turned it up and the problem re-occurred. I've recommended that he replace the speaker/speakers and maybe upgraded. Does anyone know of places for parts and have any suggestions on what the problem was and replacement speakers? Ta fellas, I know your collective wisdom will help me get to the bottom of this. DaN Quote Link to comment Share on other sites More sharing options...
MB1 Posted November 30, 2007 Share Posted November 30, 2007 (edited) MB1. ???????? ??????? ??????? ?????????ASHDOWN PERHAPS?????????? !!!!!!!!!!!!! Edited November 30, 2007 by MB1 Quote Link to comment Share on other sites More sharing options...
steve-soar Posted November 30, 2007 Share Posted November 30, 2007 Spew the Ashdown speakers and fit a pair of 8 ohm Eminence Neo's, that way your friend will get the full power through the combo. Quote Link to comment Share on other sites More sharing options...
richy316 Posted November 30, 2007 Share Posted November 30, 2007 Yes they do! Quote Link to comment Share on other sites More sharing options...
DanOwens Posted December 1, 2007 Author Share Posted December 1, 2007 Hey guys, I know.... Ashdown!!! I hate them too, but he really likes them and its not like he's got a load of spare cash to blast on a good Ampeg rig (He's a ROAWK bassist). I'll put the idea of eminence neos to him, any more suggestions? Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.