franzbassist Posted June 30, 2010 Share Posted June 30, 2010 (edited) OK, I really don't want to do this, but finances are tight and this is actually way more than I really need right now, so... [b][url="http://www.demeteramps.com/products/bassamplification/hbp1.html"]Demeter HBP1 Tube Preamp[/url][/b] A truly awesome tube preamp. This unit sounds wonderful and is very simple to use. Passive tone controls are augmented by a two band solid state parametric equalizer. It also has a fully adjustable active effects loop, tuner output, a full balanced output with switchable mic or line level, both a balanced TRS line level output and an unbalanced line level output for amplifier connections and a mute switch. Very hard to find in the UK used, I was quoted £949 for a new one by a UK dealer. Used but in very good condition with only minor rack rash. [b][url="http://www.peavey.com/products/browse.cfm/action/detail/cat/490/item/116949/number/03001260/IPR%26trade%3B1600.cfm"]Peavey IPR1600 Power Amp[/url][/b] This is the new kid on the Class D power amp block from Peavey. It puts out 830 watts per channel at 2 ohms and weighs less than 7lbs! Featuring 2 channels hi pass/low pass crossovers, a variable-speed fan housed in a lightweight aluminum chassis, patented DDT speaker protection. NB: It cannot be bridged! These are £349 retail in the UK. This one is two months old and totally mint. All stacked in a nice new (well, two months old) [url="http://www.thomann.de/gb/thon_rack_4_he_economy.htm"]Thon 4u case [/url]with [url="http://www.thomann.de/gb/adam_hall_87221vh_entlueftungsblende_1_he.htm"]1u blanking vent plate[/url], OBBM Y connector and a Y power lead. [b]£925 for the full setup[/b], collected from NE Hampshire or Central London. Prefer not to post but can be persuaded at your cost. Thanks for looking. Gareth Edited August 12, 2010 by walbassist Link to comment Share on other sites More sharing options...
birdy Posted June 30, 2010 Share Posted June 30, 2010 Whatever you do DONT let Flanker see this. He is on a mission to buy every pre and power amp known to man :-) Link to comment Share on other sites More sharing options...
franzbassist Posted June 30, 2010 Author Share Posted June 30, 2010 Link to comment Share on other sites More sharing options...
Flanker Posted June 30, 2010 Share Posted June 30, 2010 [quote]Whatever you do DONT let Flanker see this. He is on a mission to buy every pre and power amp known to man :-)[/quote] Well I was until I tried Powersoft, now the others are for sale! Bump for a powerful lightweight setup. Link to comment Share on other sites More sharing options...
franzbassist Posted July 2, 2010 Author Share Posted July 2, 2010 I [i]may[/i] consider splitting up if there's any real interest in anything here. Link to comment Share on other sites More sharing options...
franzbassist Posted July 9, 2010 Author Share Posted July 9, 2010 (edited) A few people have asked if I'll split, so the answer is yes and the prices are: £550 for the Demeter £300 for the Peavey amp (15% off new for a 6 week old amp) £55 for the Thon case These prices don't include postage. Edited July 9, 2010 by walbassist Link to comment Share on other sites More sharing options...
geoffbassist Posted July 9, 2010 Share Posted July 9, 2010 Great rig! Good luck mate :-) Link to comment Share on other sites More sharing options...
franzbassist Posted July 9, 2010 Author Share Posted July 9, 2010 Thanks Geoff, yes it is top notch stuff, but sadly I need the readies right now Link to comment Share on other sites More sharing options...
franzbassist Posted July 10, 2010 Author Share Posted July 10, 2010 bump Link to comment Share on other sites More sharing options...
franzbassist Posted July 12, 2010 Author Share Posted July 12, 2010 bump Link to comment Share on other sites More sharing options...
franzbassist Posted July 12, 2010 Author Share Posted July 12, 2010 [url="http://www.demeteramps.com/manuals/hbp1usersguide.pdf"]Demeter spec sheet[/url] [url="http://www.peavey.com/assets/literature/manuals/03001260_8659.pdf"]Peavey Manual[/url] Link to comment Share on other sites More sharing options...
franzbassist Posted July 13, 2010 Author Share Posted July 13, 2010 bump Link to comment Share on other sites More sharing options...
franzbassist Posted July 14, 2010 Author Share Posted July 14, 2010 Apparently the Demeter are £949 new in the UK now, not the £700 I was told previously, so OP is now amended. Link to comment Share on other sites More sharing options...
franzbassist Posted July 17, 2010 Author Share Posted July 17, 2010 bump Link to comment Share on other sites More sharing options...
franzbassist Posted July 19, 2010 Author Share Posted July 19, 2010 bump Link to comment Share on other sites More sharing options...
franzbassist Posted July 19, 2010 Author Share Posted July 19, 2010 Demeter now £500 Link to comment Share on other sites More sharing options...
franzbassist Posted July 20, 2010 Author Share Posted July 20, 2010 [b]£875[/b] collected for the Demeter pre, Peavey amp, Thon rack case, blanking strip, lead and connecting cable. Any takers? Link to comment Share on other sites More sharing options...
franzbassist Posted July 23, 2010 Author Share Posted July 23, 2010 (edited) Happy to sell separately and post using insured courier if you cover the cost. Edited July 23, 2010 by walbassist Link to comment Share on other sites More sharing options...
franzbassist Posted July 26, 2010 Author Share Posted July 26, 2010 Now on eBay at £900 the lot, but would prefer to sell on here. Am happy to sell the items individually and post at your cost. Link to comment Share on other sites More sharing options...
franzbassist Posted July 27, 2010 Author Share Posted July 27, 2010 (edited) £850 plus postage for the whole setup. Edited July 28, 2010 by walbassist Link to comment Share on other sites More sharing options...
franzbassist Posted July 28, 2010 Author Share Posted July 28, 2010 I have just scored an amazing deal on a PJB rig so these items really need to go. Revised prices for separates: Demeter £485 (includes balanced OBBM Y lead) Peavey IPR1600 £275 (includes mains Y lead) Thon 4u & 1u blanking plate £50 [b]Or the lot for £800![/b] All prices exclude postage. Link to comment Share on other sites More sharing options...
franzbassist Posted July 29, 2010 Author Share Posted July 29, 2010 bump Link to comment Share on other sites More sharing options...
franzbassist Posted August 1, 2010 Author Share Posted August 1, 2010 bump Link to comment Share on other sites More sharing options...
franzbassist Posted August 2, 2010 Author Share Posted August 2, 2010 Link to comment Share on other sites More sharing options...
franzbassist Posted August 5, 2010 Author Share Posted August 5, 2010 bump Link to comment Share on other sites More sharing options...
Recommended Posts