Bloc Riff Nut Posted July 29, 2010 Share Posted July 29, 2010 The last 2 gigs we've played I've had to reduce the volume so much I could hardly hear myself play. The bass-drum microphone has an issue with my amp. The amp is used as a monitor for onstage sound so it's not too loud, the majority of volume comes from the PA. We were getting lots of distortion/feedback with the soundcheck, reducing my amp volume was the cure. Both gigs were played on a hollow stage. Has anyone any ideas? Not hearing yourself on stage is depressing. PLEASE HELP :-( Phil. Quote Link to comment Share on other sites More sharing options...
Ian Savage Posted July 29, 2010 Share Posted July 29, 2010 How is the bass drum mic mounted? If it's on a stand, it might be worth taking it off and putting it inside the bass drum on your drummer's damping (assuming he uses a pillow/blanket/whatever for bass drum micing); if it's not stand-mounted or it's on a solid-metal based mic stand, one with rubber feet might solve it. Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted July 29, 2010 Share Posted July 29, 2010 More likely it's the vibration though the stage floor. Ive had the same issue myself. Get an Auralex Gramma Pad. Proplem Solved... And it tightened the bottom end sound up loads as well! Best £40 I ever spent! Quote Link to comment Share on other sites More sharing options...
Alien Posted July 29, 2010 Share Posted July 29, 2010 What about using DI instead? A Quote Link to comment Share on other sites More sharing options...
wotnwhy Posted July 29, 2010 Share Posted July 29, 2010 [quote name='Alien' post='909672' date='Jul 29 2010, 09:40 PM']What about using DI instead? A[/quote] DI the bass drum? Quote Link to comment Share on other sites More sharing options...
escholl Posted July 29, 2010 Share Posted July 29, 2010 [quote name='wotnwhy' post='909683' date='Jul 29 2010, 09:49 PM']DI the bass drum? [/quote] Isn't that what the hole in front is for? I always thought it just took a BIG xlr jack...? Quote Link to comment Share on other sites More sharing options...
Phil Starr Posted July 31, 2010 Share Posted July 31, 2010 These problems are caused mainly by resonances. Different rooms and structures will have resonances that emphasize different notes that will in turn be picked up by a mic. These resonances will be dependant upon the wavelength of the sound and simply moving the drums, bass stack or mic may well sort out the problem. Obviously a bouncy stage will also resonate. If you get this problem again then try setting it up so that the resonance is just starting and then try moving things around a little. You should be able to shift the 'hot spot' so it doesn't coincide with the mic in question. You could also try using the tone controls to tune the problem out. If you use a combo then try using a stand to point it at your ears. You get better monitoring and the stand will help decouple the amp from the stage. Quote Link to comment Share on other sites More sharing options...
ironside1966 Posted July 31, 2010 Share Posted July 31, 2010 Have you eliminated all the other possibilities? A doggie lead, channel of the desk, cross over, power amp, Pa speaker and microphone Quote Link to comment Share on other sites More sharing options...
nash Posted July 31, 2010 Share Posted July 31, 2010 gate the kick mic Quote Link to comment Share on other sites More sharing options...
Bloc Riff Nut Posted July 31, 2010 Author Share Posted July 31, 2010 Thanks for the feedback guys. I'll be trying the rubber mat to seperate my Markbass combo from the stage and I'll keep in mind that such interference/resonance can be eliminated using tone/bass controls. ;-) Phil. Quote Link to comment Share on other sites More sharing options...
dave_bass5 Posted August 2, 2010 Share Posted August 2, 2010 [quote name='pantherairsoft' post='909649' date='Jul 29 2010, 09:11 PM']More likely it's the vibration though the stage floor. Ive had the same issue myself. Get an Auralex Gramma Pad. Proplem Solved... And it tightened the bottom end sound up loads as well! Best £40 I ever spent![/quote] Same here. We play loads of hollow stages and getting one of these has been a god send. Quote Link to comment Share on other sites More sharing options...
JakeBrownBass Posted August 3, 2010 Share Posted August 3, 2010 [quote name='philipleonard' post='911498' date='Jul 31 2010, 09:28 PM']Thanks for the feedback guys. I'll be trying the rubber mat to seperate my Markbass combo from the stage and I'll keep in mind that such interference/resonance can be eliminated using tone/bass controls. ;-) Phil.[/quote] Its not quite as simple as a rubber mat Honestly, you won't regret getting a Auralex Gramma Pad. Quote Link to comment Share on other sites More sharing options...
wateroftyne Posted August 3, 2010 Share Posted August 3, 2010 Gramma pad. Even if it doesn't fix this particular problem, it'll take a hell of a lot out of the equation. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.