Flex Posted August 22, 2010 Share Posted August 22, 2010 Require Amp/Cab or Combo I am reluctantly trading my Schecter Hellraiser 4 NT. [url="http://s188.photobucket.com/albums/z175/EnemyBass/Schecter/"]http://s188.photobucket.com/albums/z175/EnemyBass/Schecter/[/url] It is a solid mahogany body through neck with a quilted maple top and mother of pearl binding finished in a translucent candy red It has been upgraded with an Aguilar OBP 3 preamp in a bass/treb stack and mid with push pull for different hz and a switch to go fully passive and has been fully sheilded, it is dead silent even with treble boosted. It is an awesome bass and really does have a gorgeous tone. The pre can be used in 9v or 18v mode in 18v it really spanks hard, which I guess could be down to the solid mahogany body and dual coils This is a very versatile and great sounding powerfull bass It has also had a Warwick Just a nut II fitted which lets you adjust the nut height aswell as Warwick Strap locks It has been has been gigged, recorded, etc so it does have the odd mark but nothing too serious its currently fitted with 2 month old DR Hi-Beams and was fully set up when they were fitted. These basses are currently £750+ and with the preamp, locks and nut, it's a good £950 instrument. The Bass also includes the original Schecter Fitted case. SCHECTER HELLRAISER 4 BASS GUITAR FEATURES * BODY: Mahogany w/ Figured Maple * NECK/FINGERBOARD: Multi-Laminate Maple & Walnut / Rosewood * FRETS: 24 Jumbo * INLAYS: Black Pearl 'Gothic Cross' * PICKUPS: EMG passives * ELECTRONICS: Vol/Blend/ Active 9/18-Volt 3-band EQ (Aguilar OBP 3 preamp) UPGRADED !!! * BRIDGE: Schecter Custom String Thru Body (or Top Load) * BINDING: Abalone * TUNERS: Schecter * HARDWARE: Black Chrome Willing to look at most Bass Amps/Cabs or combo's that are a fair trade for this stunning bass. Link to comment Share on other sites More sharing options...
Recommended Posts